INSTALL(8)		NetBSD System Manager's	Manual		    INSTALL(8)

NNAAMMEE
     IINNSSTTAALLLL --	Installation procedure for NetBSD/amiga.

CCOONNTTEENNTTSS
      About this Document............................................2
      What is NetBSD?................................................2
      Changes Between The NetBSD 7.0 and 7.0.1 Releases..............2
      Features to be removed in	a later	release......................2
      The NetBSD Foundation..........................................3
      Sources of NetBSD..............................................3
      NetBSD 7.0.1 Release Contents..................................3
	 NetBSD/amiga subdirectory structure.........................4
	 Miniroot file system........................................4
	 Binary	distribution sets....................................5
      NetBSD/amiga System Requirements and Supported Devices.........6
	 Supported devices...........................................6
      Getting the NetBSD System	on to Useful Media...................8
      Preparing	your System for	NetBSD installation.................10
	 Preparing your	hard disk with HDToolBox....................10
	 Transferring the miniroot file	system......................11
      Installing the NetBSD System..................................12
	 Booting....................................................12
	 Once your kernel boots.....................................13
      Post installation	steps.......................................15
      Upgrading	a previously-installed NetBSD System................17
	 Once your kernel boots.....................................18
      Compatibility Issues With	Previous NetBSD	Releases............19
	 Issues	affecting an upgrade from NetBSD 5.x releases.......19
	 Issues	affecting an upgrade from NetBSD 6.x releases.......19
      Using online NetBSD documentation.............................19
      Administrivia.................................................20
      Thanks go	to..................................................20
      We are........................................................21
      Legal Mumbo-Jumbo.............................................27
      The End.......................................................33

DDEESSCCRRIIPPTTIIOONN
   AAbboouutt tthhiiss DDooccuummeenntt
     This document describes the installation procedure	for NetBSD 7.0.1 on
     the _a_m_i_g_a platform.  It is	available in four different formats titled
     _I_N_S_T_A_L_L_._e_x_t, where	_._e_x_t is	one of _._p_s, _._h_t_m_l, _._m_o_r_e, or _._t_x_t:

	   _._p_s	   PostScript.

	   _._h_t_m_l   Standard Internet HTML.

	   _._m_o_r_e   The enhanced	text format used on UNIX-like systems by the
		   more(1) and less(1) pager utility programs.	This is	the
		   format in which the on-line _m_a_n pages are generally pre-
		   sented.

	   _._t_x_t	   Plain old ASCII.

     You are reading the _m_o_r_e version.

   WWhhaatt	iiss NNeettBBSSDD??
     The NetBSD	Operating System is a fully functional Open Source UNIX-like
     operating system derived from the University of California, Berkeley Net-
     working Release 2 (Net/2),	4.4BSD-Lite, and 4.4BSD-Lite2 sources.	NetBSD
     runs on many different different system architectures (ports) across a
     variety of	distinct CPU families, and is being ported to more.  The
     NetBSD 7.0.1 release contains complete binary releases for	most of	these
     system architectures, with	preliminary support for	the others included in
     source form.  Please see the NetBSD website at hhttttpp::////wwwwww..NNeettBBSSDD..oorrgg// for
     information on them.)

     NetBSD is a completely integrated system.	In addition to its highly por-
     table, high performance kernel, NetBSD features a complete	set of user
     utilities,	compilers for several languages, the X Window System, firewall
     software and numerous other tools,	all accompanied	by full	source code.

     NetBSD is a creation of the members of the	Internet community.  Without
     the unique	cooperation and	coordination the net makes possible, NetBSD
     would not exist.

   CChhaannggeess BBeettwweeeenn TThhee NNeettBBSSDD 77..00 aanndd 77..00..11 RReelleeaasseess
     NetBSD 7.0.1 is the first critical/security update	of the NetBSD 7.0
     release branch.  It represents a selected subset of fixes deemed critical
     for security or stability reasons.

     The complete list of changes can be found in the CHANGES-7.0.1:
	   hhttttpp::////ffttpp..NNeettBBSSDD..oorrgg//ppuubb//NNeettBBSSDD//NNeettBBSSDD--77..00..11//CCHHAANNGGEESS--77..00..11
     file in the top level directory of	the NetBSD 7.0.1 release tree.

     See
	   hhttttpp::////wwwwww..NNeettBBSSDD..oorrgg//rreelleeaasseess//ffoorrmmaall--77//NNeettBBSSDD--77..00..11..hhttmmll
     for some of the more noteworthy changes in	this release.

   FFeeaattuurreess ttoo bbee rreemmoovveedd iinn aa llaatteerr rreelleeaassee
     The following features are	to be removed from NetBSD in the future:

     ++oo	 dhclient(8) and rtsol(8) in favor of dhcpcd(8).

     ++oo	 groff(1).  Man	pages are now handled with mandoc(1), and groff(1) can
	 still be found	in pkgsrc as _t_e_x_t_p_r_o_c_/_g_r_o_f_f.

     ++oo	 rtsol(8) and rtsold(8).

   TThhee NNeettBBSSDD FFoouunnddaattiioonn
     The NetBSD	Foundation is a	tax exempt, not-for-profit 501(c)(3) corpora-
     tion that devotes itself to the traditional goals and Spirit of the
     NetBSD Project and	owns the trademark of the word ``NetBSD''.  It sup-
     ports the design, development, and	adoption of NetBSD worldwide.  More
     information on the	NetBSD Foundation, its composition, aims, and work can
     be	found at:
	   hhttttpp::////wwwwww..NNeettBBSSDD..oorrgg//ffoouunnddaattiioonn//

   SSoouurrcceess ooff NNeettBBSSDD
     Refer to
	   hhttttpp::////wwwwww..NNeettBBSSDD..oorrgg//mmiirrrroorrss//

   NNeettBBSSDD 77..00..11	RReelleeaassee	CCoonntteennttss
     The root directory	of the NetBSD 7.0.1 release is organized as follows:

     _._._._/_N_e_t_B_S_D_-_7_._0_._1_/

     CHANGES	   Changes between the 6.0 and 7.0 releases.

     CHANGES-7.0   Changes between the initial 7.0 branch and the final
		   release of 7.0.

     CHANGES-7.0.1
		   Changes between the 7.0 and 7.0.1 releases.

     CHANGES.prev  Changes in previous NetBSD releases.

     LAST_MINUTE   Last	minute changes and notes about the release.

     README.files  README describing the distribution's	contents.

     _i_m_a_g_e_s_/	   Images (ISO 9660 or USB) for	installing NetBSD.  Depending
		   on your system, these may be	bootable.

     _s_o_u_r_c_e_/	   Source distribution sets; see below.

     In	addition to the	files and directories listed above, there is one
     directory per architecture, for each of the architectures for which
     NetBSD 7.0.1 has a	binary distribution.

     The source	distribution sets can be found in subdirectories of the	_s_o_u_r_c_e
     subdirectory of the distribution tree.  They contain the complete sources
     to	the system.  The source	distribution sets are as follows:

     ggnnuussrrcc    This set	contains the ``gnu'' sources, including	the source for
	       the compiler, assembler,	groff, and the other GNU utilities in
	       the binary distribution sets.

     sshhaarreessrrcc  This set	contains the ``share'' sources,	which include the
	       sources for the man pages not associated	with any particular
	       program;	the sources for	the typesettable document set; the
	       dictionaries; and more.

     ssrrcc       This set	contains all of	the base NetBSD	7.0.1 sources which
	       are not in ggnnuussrrcc, sshhaarreessrrcc, or ssyyssssrrcc.

     ssyyssssrrcc    This set	contains the sources to	the NetBSD 7.0.1 kernel	for
	       all architectures as well as the	config(1) utility.

     xxssrrcc      This set	contains the sources to	the X Window System.

     All the above source sets are located in the _s_o_u_r_c_e_/_s_e_t_s subdirectory of
     the distribution tree.

     The source	sets are distributed as	compressed tar files.  Except for the
     ppkkggssrrcc set, which is traditionally	unpacked into _/_u_s_r_/_p_k_g_s_r_c, all sets
     may be unpacked into _/_u_s_r_/_s_r_c with	the command:
	   # ccdd	// ;; ttaarr	--zzxxppff sseett__nnaammee..ttggzz

     In	each of	the source distribution	set directories, there are files which
     contain the checksums of the files	in the directory:

	   MD5	   MD5 digests in the format produced by the command:
		   cckkssuumm --aa MMDD55	_f_i_l_e.

	   SHA512  SHA512 digests in the format	produced by the	command:
		   cckkssuumm --aa SSHHAA551122 _f_i_l_e.

     The SHA512	digest is safer, but MD5 checksums are provided	so that	a
     wider range of operating systems can check	the integrity of the release
     files.

     _N_e_t_B_S_D_/_a_m_i_g_a _s_u_b_d_i_r_e_c_t_o_r_y _s_t_r_u_c_t_u_r_e

     The amiga-specific	portion	of the NetBSD 7.0.1 release is found in	the
     _a_m_i_g_a subdirectory	of the distribution: _._._._/_N_e_t_B_S_D_-_7_._0_._1_/_a_m_i_g_a_/.  It con-
     tains the following files and directories:

     _I_N_S_T_A_L_L_._h_t_m_l
     _I_N_S_T_A_L_L_._p_s
     _I_N_S_T_A_L_L_._t_x_t
     _I_N_S_T_A_L_L_._m_o_r_e  Installation	notes in various file formats, including this
		   file.  The _._m_o_r_e file contains underlined text using	the
		   more(1) conventions for indicating italic and bold display.
     _b_i_n_a_r_y_/
		   _k_e_r_n_e_l_/
			    _n_e_t_b_s_d_-_G_E_N_E_R_I_C_._g_z
				       A gzipped NetBSD	kernel containing code
				       for everything supported	in this
				       release.
		   _s_e_t_s_/    amiga binary distribution sets; see	below.
     _i_n_s_t_a_l_l_a_t_i_o_n_/
		   _f_l_o_p_p_y_/    amiga boot and installation floppies; see	below.
		   _m_i_n_i_r_o_o_t_/  amiga miniroot file system image;	see below.
		   _m_i_s_c_/      Miscellaneous amiga installation utilities; see
			      installation section below.

     _M_i_n_i_r_o_o_t _f_i_l_e _s_y_s_t_e_m

     The Amiga now uses	a single miniroot file system for both an initial
     installation and for an upgrade.  A gzipped version is available, for
     easier downloading.  (The gzipped version has the ..ggzz extension added to
     their names.)

     _m_i_n_i_r_o_o_t_._f_s  This file contains a BSD root	file system setup to help you
		  install the rest of NetBSD or	to upgrade a previous version
		  of NetBSD.  This includes formatting and mounting your _/
		  (root) and _/_u_s_r partitions and getting ready to extract (and
		  possibly first fetching) the distribution sets.  There is
		  enough on this file system to	allow you to make a SLIP or
		  PPP connection, configure an Ethernet, mount an NFS file
		  system or ftp.  You can also load distribution sets from a
		  SCSI tape or from one	of your	existing AmigaDOS partitions.

     _B_i_n_a_r_y _d_i_s_t_r_i_b_u_t_i_o_n _s_e_t_s

     The NetBSD	amiga binary distribution sets contain the binaries which com-
     prise the NetBSD 7.0.1 release for	amiga.	The binary distribution	sets
     can be found in the _a_m_i_g_a_/_b_i_n_a_r_y_/_s_e_t_s subdirectory	of the NetBSD 7.0.1
     distribution tree,	and are	as follows:

     bbaassee     The NetBSD 7.0.1 amiga bbaassee binary distribution.	You _m_u_s_t
	      install this distribution	set.  It contains the base NetBSD
	      utilities	that are necessary for the system to run and be	mini-
	      mally functional.

     ccoommpp     Things needed for	compiling programs.  This set includes the
	      system include files (_/_u_s_r_/_i_n_c_l_u_d_e) and the various system
	      libraries	(except	the shared libraries, which are	included as
	      part of the bbaassee set).  This set also includes the manual	pages
	      for all of the utilities it contains, as well as the system call
	      and library manual pages.

     eettcc      This distribution	set contains the system	configuration files
	      that reside in _/_e_t_c and in several other places.	This set _m_u_s_t
	      be installed if you are installing the system from scratch, but
	      should _n_o_t be used if you	are upgrading.

     ggaammeess    This set includes	the games and their manual pages.

     kkeerrnn--GGEENNEERRIICC
	      This set contains	a NetBSD/amiga 7.0.1 GENERIC kernel, named
	      _/_n_e_t_b_s_d.	You _m_u_s_t install this distribution set.

     mmaann      This set includes	all of the manual pages	for the	binaries and
	      other software contained in the bbaassee set.	 Note that it does not
	      include any of the manual	pages that are included	in the other
	      sets.

     mmiisscc     This set includes	the system dictionaries, the typesettable doc-
	      ument set, and other files from _/_u_s_r_/_s_h_a_r_e.

     mmoodduulleess  This set includes	kernel modules to add functionality to a run-
	      ning system.

     tteexxtt     This set includes	NetBSD's text processing tools,	including
	      groff(1),	all related programs, and their	manual pages.

     NetBSD maintains its own set of sources for the X Window System in	order
     to	assure tight integration and compatibility.  These sources are based
     on	XFree86	4.5.0.	Binary sets for	the X Window System are	distributed
     with NetBSD.  The sets are:

     xxbbaassee    The basic	files needed for a complete X client environment.
	      This does	not include the	X servers.

     xxccoommpp    The extra	libraries and include files needed to compile X	source
	      code.

     xxffoonntt    Fonts needed by the X server and by X clients.

     xxeettcc     Configuration files for X	which could be locally modified.

     xxsseerrvveerr  The X server.

     The amiga binary distribution sets	are distributed	as gzipped tar files
     named with	the extension ..ttggzz, e.g.  _b_a_s_e_._t_g_z.

     The instructions given for	extracting the source sets work	equally	well
     for the binary sets, but it is worth noting that if you use that method,
     the filenames stored in the sets are relative and therefore the files are
     extracted _b_e_l_o_w _t_h_e _c_u_r_r_e_n_t _d_i_r_e_c_t_o_r_y.  Therefore,	if you want to extract
     the binaries into your system, i.e.  replace the system binaries with
     them, you have to run the ttaarr --xxzzppff command from the root directory ( _/ )
     of	your system.

     _N_o_t_e_:  Each directory in the amiga	binary distribution also has its own
	    checksum files, just as the	source distribution does.

   NNeettBBSSDD//aammiiggaa	SSyysstteemm RReeqquuiirreemmeennttss aanndd	SSuuppppoorrtteedd DDeevviicceess
     NetBSD 7.0.1 runs on any Amiga that has a 68020 or	better CPU with	some
     form of MMU, and on 68060 DraCos.

     NetBSD does not, and will never, run on run on A1000, A500, A600, A1200,
     A2000, A4000/EC030, CDTV and CD32 systems that are	not enhanced by	a CPU
     board.

     For 68020 and 68030 systems, a FPU	is recommended but not required	for
     the system	utilities.  68LC040, 68040V and	68LC060	systems	don't work
     correctly at the moment.

     The minimal configuration requires	around 24 MB of	RAM (not including
     CHIPMEM!)	and about 250 MB of disk space.	 To install the	entire system
     requires much more	disk space, and	to run X or compile the	system,	more
     RAM is recommended.  (24 MB of RAM	will actually allow you	to compile,
     however it	won't be speedy.  X really isn't usable	on a 24	MB system.)

     You will probably want to compile your own	kernel.	 GENERIC is large and
     bulky in order to accommodate all people.	For example, most people's
     machines have an FPU, so you do not need the bulky	FPU_EMULATE option.

     If	you have less than 8 MB	of fast	memory,	you should make	your swap par-
     tition large, as your system will be a lot	of swapping.  In addition, do
     _n_o_t place your swap partition onto	a old small (and normally slow)	disk!

     _S_u_p_p_o_r_t_e_d _d_e_v_i_c_e_s

	   ++oo   IDE controllers
	       --   A4000/A1200 IDE controller, including ATAPI devices
	       --   ELBOX FastATA 1200 Mk-III/Mk-IV
	       --   Individual Computers	ACA500 (both CF	slots)
	       --   Individual Computers	X-Surf IDE

	   ++oo   SCSI host adapters
	       --   33c93 based boards: A2091, A3000 builtin, A3000 builtin
		   modified for	Apollo accelerator board (please note that
		   this	is not the same	as the SCSI host adapter on the	Apollo
		   accelerator board itself, which is unsupported), and	GVP
		   series II.
	       --   53c80 based boards: 12 Gauge, IVS, Wordsync/Bytesync	and
		   Emplant The Emplant SCSI adapter has	been reported by a
		   party to hang after doing part of the installation without
		   problems
	       --   53c710 based	boards:	A4091, BlizzardPPC 603e+, Magnum, Warp
		   Engine, Zeus	and DraCo builtin
	       --   FAS216 based	SCSI boards: FastLane Z3, Blizzard I and II,
		   Blizzard IV,	Blizzard 2060, CyberSCSI Mk I and II
	       --   53c770 based	SCSI boards: Cyberstorm	Mk III SCSI, Cyber-
		   storm PPC SCSI

	   ++oo   PCI bridges
	       --   ELBOX Mediator PCI 1200 series (original model, LT2,	LT4,
		   SX, TX)
	       --   ELBOX Mediator PCI 4000 series (4000D, 4000Di, 3000D,
		   3/4000T, also Mk-II models)
	       --   Prometheus PCI bridge
	       --   Phase5 PCI bridge: CyberVision PPC, BlizzardVision PPC

	   ++oo   Clockports
	       --   Amiga 1200 on-board clockport

	   ++oo   Video controllers
	       --   ECS,	AGA and	A2024 built in on various Amigas
	       --   Retina Z2 (no X server available), Retina Z3	and Altais
	       --   Cirrus CL GD	54xx based boards: GVP Spectrum, Picasso II,
		   II+ and IV, Piccolo and Piccolo SD64
	       --   Tseng ET4000	based boards: Domino and Domino16M proto,
		   oMniBus, Merlin
	       --   A2410 (no X server available)
	       --   Cybervision 64
	       --   Cybervision 64/3D

	   ++oo   Audio I/O
	       --   Amiga builtin
	       --   Melody MPEG-audio layer 2 board
	       --   Repulse audio board

	   ++oo   Ethernet	controllers
	       --   A2065 Ethernet
	       --   Hydra Ethernet
	       --   ASDG	Ethernet
	       --   A4066 Ethernet
	       --   Ariadne Ethernet
	       --   Ariadne II Ethernet
	       --   Quicknet Ethernet
	       --   X-Surf Ethernet
	       --   X-Surf 100 Ethernet

	   ++oo   ARCnet controllers
	       --   A2060 ARCnet

	   ++oo   Most SCSI tape drives, including	Archive	Viper, Cipher SCSI-2
	       ST150

	   ++oo   SCSI-2 scanners behaving	as SCSI-2 scanner devices, HP ScanJet
	       II, Mustek SCSI scanner.	 SCSI scanner support is machine inde-
	       pendent,	so it should work, but hasn't been tested on most
	       Amiga configurations.  There are	reports	that the Mustek	and HP
	       ScanJet hang if accessed	from the A3000.	 This might apply to
	       other 33C93-Adapters, too.

	   ++oo   Most SCSI CD-ROM	drives

	   ++oo   Serial/Parallel cards
	       --   HyperCom 3Z,	HyperCom 4, HyperCom 3+	and 4+
	       --   MultiFaceCard II and	III
	       --   A2232 (normal and clockdoubled)
	       --   SilverSurfer	clockport-based	serial port
	       --   IOBlix Zorro-Bus

	   ++oo   Amiga floppy drives with	Amiga (880/1760kB) and IBM
	       (720/1440kB) encoding.  Our floppy driver doesn't notice	when
	       mounted floppies	are write-protected.  Your floppy will stay
	       unchanged, but you might	not notice that	you didn't write any-
	       thing due to the	buffer cache.  Also note that HD floppy	drives
	       only get	detected as such if a HD floppy	is inserted at boot
	       time.

	   ++oo   Amiga parallel port

	   ++oo   Amiga serial port

	   ++oo   Amiga mouse

	   ++oo   DraCo serial port, including serial mouse

	   ++oo   DraCo parallel printer port

	   ++oo   Real-time clocks
	       --   A2000, A3000, A4000 builtin (r/w)
	       --   DraCo builtin (r/o)

     If	it's not on the	above lists, there is no support for it	in this
     release.  In particular, there are	no drivers for:	Blizzard III SCSI
     option, Ferret SCSI, Oktagon SCSI.

   GGeettttiinngg tthhee NNeettBBSSDD SSyysstteemm oonn	ttoo UUsseeffuull MMeeddiiaa
     Installation is supported from several media types, including:

	   ++oo   AmigaDOS
	   ++oo   CD-ROM /	DVD
	   ++oo   FTP
	   ++oo   Remote NFS partition
	   ++oo   Tape
	   ++oo   Existing	NetBSD partitions, if performing an upgrade

     The steps necessary to prepare the	distribution sets for installation
     depend upon which installation medium you choose.	The steps for the var-
     ious media	are outlined below.

     _A_m_i_g_a_D_O_S _p_a_r_t_i_t_i_o_n
		   To install NetBSD from an AmigaDOS partition, you need to
		   get the NetBSD distribution sets you	wish to	install	on
		   your	system on to an	AmigaDOS partition.

		   Note	where you place	the files as you will need this	later.

		   Once	you have done this, you	can proceed to the next	step
		   in the installation process,	preparing your hard disk.

     _C_D_-_R_O_M _/ _D_V_D  To install NetBSD from a CD-ROM drive, make sure it is a
		   SCSI	CD-ROM on a SCSI bus currently supported by NetBSD
		   (refer to the supported hardware list) or an	ATAPI CD-ROM
		   connected to	the A1200 or A4000 internal IDE	connector.  If
		   it is a SCSI	CD-ROM on a non-supported SCSI bus like	Bliz-
		   zard-3 SCSI or Apollo SCSI you must first copy the distri-
		   bution sets to an AmigaDOS partition	as described above.

		   If your SCSI	CD-ROM is connected to a supported SCSI	host
		   adapter, or it is an	ATAPI cd-rom connected to the
		   A1200/A4000 internal	IDE connector, simply put the CD into
		   the drive before installation.

		   Find	out where the distribution set files are on the	CD-ROM
		   or DVD.  Likely locations are _b_i_n_a_r_y_/_s_e_t_s and
		   _a_m_i_g_a_/_b_i_n_a_r_y_/_s_e_t_s.

		   Proceed to the instructions on installation.

     _F_T_P	   The preparations for	this installation/upgrade method are
		   easy; all you need to do is make sure that there's an FTP
		   site	from which you can retrieve the	NetBSD distribution
		   when	you're about to	install	or upgrade.  If	you don't have
		   DHCP	available on your network, you will need to know the
		   numeric IP address of that site, and, if it's not on	a net-
		   work	directly connected to the machine on which you're
		   installing or upgrading NetBSD, you need to know the
		   numeric IP address of the router closest to the NetBSD
		   machine.  Finally, you need to know the numeric IP address
		   of the NetBSD machine itself.

		   Once	you have this information, you can proceed to the next
		   step	in the installation or upgrade process.	 If you're
		   installing NetBSD from scratch, go to the section on	pre-
		   paring your hard disk, below.  If you're upgrading an
		   existing installation, go directly to the section on
		   upgrading.

     _N_F_S	   Place the NetBSD distribution sets you wish to install into
		   a directory on an NFS server, and make that directory
		   mountable by	the machine on which you are installing	or
		   upgrading NetBSD.  This will	probably require modifying the
		   _/_e_t_c_/_e_x_p_o_r_t_s	file on	the NFS	server and resetting its mount
		   daemon (mountd).  (Both of these actions will probably
		   require superuser privileges	on the server.)

		   You need to know the	numeric	IP address of the NFS server,
		   and,	if you don't have DHCP available on your network and
		   the server is not on	a network directly connected to	the
		   machine on which you're installing or upgrading NetBSD, you
		   need	to know	the numeric IP address of the router closest
		   to the NetBSD machine.  Finally, you	need to	know the
		   numeric IP address of the NetBSD machine itself.

		   Once	the NFS	server is set up properly and you have the
		   information mentioned above,	you can	proceed	to the next
		   step	in the installation or upgrade process.	 If you're
		   installing NetBSD from scratch, go to the section on	pre-
		   paring your hard disk, below.  If you're upgrading an
		   existing installation, go directly to the section on
		   upgrading.

     _T_a_p_e	   To install NetBSD from a tape, you need to make a tape that
		   contains the	distribution set files,	in `tar' format.

		   If you're making the	tape on	a UNIX-like system, the	easi-
		   est way to do so is probably	something like:

			 # ttaarr --ccff _t_a_p_e___d_e_v_i_c_e _d_i_s_t___s_e_t_s

		   where _t_a_p_e___d_e_v_i_c_e is	the name of the	tape device that rep-
		   resents the tape drive you're using.	 This might be
		   _/_d_e_v_/_r_s_t_0, or something similar, but	it will	vary from sys-
		   tem to system.  In the above	example, _d_i_s_t___s_e_t_s is a	list
		   of filenames	corresponding to the distribution sets that
		   you wish to place on	the tape.  For instance, to put	the
		   kkeerrnn--GGEENNEERRIICC,, bbaassee,, and eettcc distributions on	tape (the
		   absolute minimum required for installation),	you would do
		   the following:

			 # ccdd ......//NNeettBBSSDD--77..00..11
			 # ccdd aammiiggaa//bbiinnaarryy
			 # ttaarr --ccff _t_a_p_e___d_e_v_i_c_e kkeerrnn--GGEENNEERRIICC..ttggzz	bbaassee..ttggzz
			 eettcc..ttggzz

		   _N_o_t_e_:  You still need to fill in _t_a_p_e___d_e_v_i_c_e	in the
			  example.

		   Once	you have the files on the tape,	you can	proceed	to the
		   next	step in	the installation or upgrade process.  If
		   you're installing NetBSD from scratch, go to	the section on
		   preparing your hard disk, below.  If	you're upgrading an
		   existing installation, go directly to the section on
		   upgrading.

   PPrreeppaarriinngg yyoouurr SSyysstteemm ffoorr NNeettBBSSDD iinnssttaallllaattiioonn
     You will need an AmigaDOS hard drive prep tool to prepare your hard
     drives for	use with NetBSD/amiga.	HDToolBox is provided with the system
     software and on floppy installation disks since Release 2.0 of AmigaDOS,
     so	we will	provide	instructions for its use.

     Note that NetBSD can't currently be installed on disks with a sector size
     other than	512 bytes (e.g., ``640 MB'' 90mm M-O media).  You can, how-
     ever, mount ADOSFS	partitions on such M-O's.

     _P_r_e_p_a_r_i_n_g _y_o_u_r _h_a_r_d _d_i_s_k _w_i_t_h _H_D_T_o_o_l_B_o_x

     A full explanation	of HDToolBox can be found with your AmigaDOS manuals
     and is beyond the scope of	this document.

     The first time you	partition a drive, you need to set its drive type so
     that you have working geometry parameters.	 To do this you	enter the
     ``Change drive type'' menu, and either use	``read parameters from drive''
     or	set them manually.

     Note that you will	be modifying your HD's.	 If you	mess something up here
     you could lose everything on all the drives that you configure.  It is
     therefore advised that you:

	   1.	Write down your	current	configurations.	 Do this by examining
		each partition on the drive and	the drives parameters (from
		Change drive type.)

	   2.	Back up	the partitions you are keeping.

     What you need to do now is	partition your drives, creating	at least root
     and swap partitions.

     This should be done as the	HDToolBox manual describes.  One thing to note
     is	that if	you are	not using a Commodore controller you will need to
     specify the device	your SCSI controller uses, e.g., if you	have a Warp
     Engine you	would:

	   From	cli
			   hhddttoooollbbooxx wwaarrppddrriivvee..ddeevviiccee

	   From	wb   Set the tooltype

			   SSCCSSII__DDEEVVIICCEE__NNAAMMEE==wwaarrppddrriivvee..ddeevviiccee

     The important things you need to do above and beyond normal partitioning
     include (from Partition Drive section):

     1.	  Marking all NetBSD partitions	as non-bootable, with two exceptions:
	  the root partition (_/) if you	want to	boot NetBSD directly, or the
	  swap partition if you	want to	boot the installation miniroot
	  directly.

     2.	  Changing the file system parameters of the partitions	to NetBSD
	  ones.	 This must be done from	the partitioning section and
	  ``Advanced options'' must be enabled.

     To	make the needed	changes:

	   1.	Click the ``Adv. Options'' button
	   2.	Click the ``Change file	system'' button
	   3.	Choose ``Custom	File System''
	   4.	Turn off ``Automount'' if on.
	   5.	Set the	dostype	to one of these	three choices:

		      root partition  :	0x4e425207    (NBR\007)
		      swap partition  :	0x4e425301    (NBS\001)
		      other partitions:	0x4e425507    (NBU\007)

		Here `other' refers to other partitions	you will format	for
		reading	and writing under NetBSD (e.g.,	_/_u_s_r)

		Make sure you press RETURN to enter this value as some ver-
		sions of HDToolBox will	forget your entry if you don't.
	   6.	Turn custom boot code off
	   7.	Set Reserved Blocks start and end to 0.
	   8.	Click Ok.

     On	the root (_/) (and, for installation, swap) partition:

	   1.	Turn custom boot code on
	   2.	Set Reserved Blocks start and end to 0.
	   3.	Set Number of Custom Boot Blocks to 16.
	   4.	Set Automount This Partition on
	   5.	Click Ok.

		Mask and maxtransfer are not used with NetBSD.

     _C_a_v_e_a_t_:  The swap (for installation) and the root partition (if you plan
	      to use the bootblocks) _m_u_s_t _b_e _w_i_t_h_i_n _t_h_e	_f_i_r_s_t 4	gigabytes of
	      the disk!	 The reason for	the former is that xstreamtodev	uses
	      trackdisk.device compatible I/O-calls, the reason	for the	latter
	      is that the bootblock gets a 32bit partition offset from the
	      operating	system.

     Once this is done NetBSD/amiga will be able to recognize your disks and
     which partitions it should	use.

     _T_r_a_n_s_f_e_r_r_i_n_g _t_h_e _m_i_n_i_r_o_o_t _f_i_l_e _s_y_s_t_e_m

     The NetBSD/amiga installation or upgrade now uses a _m_i_n_i_r_o_o_t file system
     which is installed	on the partition used by NetBSD	for swapping.  This
     removes the requirement of	using a	floppy disk for	the file system	used
     by	the installation or upgrade process.  It also allows more utilities to
     be	present	on the file system than	would be available when	using an 880
     KB	floppy disk.

     Once the hard disk	has been prepared for NetBSD, the miniroot file	system
     (_m_i_n_i_r_o_o_t_._f_s) is transferred to the swap partition	configured during the
     hard disk prep (or	the existing swap partition in the case	of an
     upgrade).	The xstreamtodev utility provided in the
     _a_m_i_g_a_/_i_n_s_t_a_l_l_a_t_i_o_n_/_m_i_s_c directory can be used on AmigaDOS to transfer the
     file system for either a new installation or an upgrade.  The file	system
     can also be transferred on	an existing NetBSD system for an update	by
     using dd.	This should only be done after booting NetBSD into single-user
     mode.  It may also	be possible to shutdown	to single-user,	providing that
     the single-user mode processes are	not using the swap partition.

     On	AmigaDOS, run the command:

	   xxssttrreeaammttooddeevv	----iinnppuutt==mmiinniirroooott..ffss ----rrddbb--nnaammee==<<sswwaapp ppaarrttiittiioonn>>

     where <swap partition> is the name	you gave to the	NetBSD partition to be
     used for swapping.	 If xxssttrreeaammttooddeevv is unable to determine	the SCSI
     driver device name	or the unit number of the specified partition, you may
     also need to include the option

	   ----ddeevviiccee==<<ddrriivveerr..nnaammee>>

     and/or

	   ----uunniitt==<<SSCCSSII	uunniitt nnuummbbeerr>>

     To	transfer the miniroot using NetBSD, you	should be booted up in single
     user mode on the current NetBSD system, or	use the	sshhuuttddoowwnn nnooww command
     to	shutdown to single-user	mode.  Then copy the miniroot using dddd:

	   dddd iiff==mmiinniirroooott..ffss ooff==//ddeevv//rrssdd00bb

     where /dev/rsd0b should be	the device path	of the swap partition your
     system is configured to use.  Once	the file is copied, reboot back	to
     AmigaDOS to boot the upgrade kernel.

     _C_a_v_e_a_t_:  Once you have started installation, if you abort it and want to
	      retry you	must reinstall the _m_i_n_i_r_o_o_t_._f_s on the swap partition.

   IInnssttaalllliinngg tthhee NNeettBBSSDD SSyysstteemm
     Installing	NetBSD is a relatively complex process,	but, if	you have this
     document in hand and are careful to read and remember the information
     which is presented	to you by the install program, it shouldn't be too
     much trouble.

     Before you	begin, you must	have already prepared your hard	disk as
     detailed in the section on	preparing your system for install.

     The following is a	walk-through of	the steps necessary to get NetBSD
     installed on your hard disk.  If you wish to stop the installation, you
     may press CONTROL-C at any	prompt,	but if you do, you'll have to begin
     again from	scratch.

     Transfer the miniroot file	system onto the	hard disk partition used by
     NetBSD for	swapping, as described in the "Preparing your System for
     NetBSD Installation" section above.

     _B_o_o_t_i_n_g

     NetBSD, with boot blocks installed

     [This description is for V40 (OS 3.1) ROMs.  For older ROMs, there	might
     be	small differences.  Check your AmigaDOS	documentation to learn about
     the exact procedure.]  Using bootblocks may not work on some systems, and
     may require a mountable file system on others.

     Reboot your machine, holding down both mouse buttons if you have a	2-but-
     ton mouse,	the outer mouse	buttons	if you have a 3-button mouse.  On the
     DraCo, press the left mouse button	instead, when the boot screen prompts
     you for it.

     From the boot menu, select	BBoooott OOppttiioonnss.  Select the swap partition with
     the miniroot, and then ookk.	 Select	BBoooott now.  The machine will boot the
     bootblock,	which will prompt your for a command line.  You	have a few
     seconds time to change the	default.  Entering an empty line will accept
     the default.

     The bootblock uses	command	lines of the form:
	 _f_i_l_e [_o_p_t_i_o_n_s]
     where _f_i_l_e	is the kernel file name	on the partition where the boot	block
     is	on, and	[options] may contain the following:

     If	you have an AGA	machine, and your monitor will handle the dblNTSC
     mode, you may include the --AA option to enable the dblNTSC display mode.

     If	your machine has a fragmented physical memory space, as, e.g., DraCo
     machines, you should add the --nn22 option to	enable the use of all memory
     segments.

     _O_n_c_e _y_o_u_r _k_e_r_n_e_l _b_o_o_t_s

     You should	see the	screen clear and some information about	your system as
     the kernel	configures the hardware.  Note which hard disk device(s) are
     configured	(sd0, sd1, etc.) Then you will be prompted for a root device.
     At	this time type sd0b, where sd0 is the device which contains the	swap
     partition you created during the hard disk	preparation.  When prompted
     for a dump	device,	answer `nnoonnee' for the install (normally, you would
     tell it one of the	swap devices).	When prompted for the root file	system
     type, confirm `ggeenneerriicc', which will auto-detect it.

     If	the system should hang after entering the root device, try again with

	   nneettbbssdd --II ffff	--bb

     This disables synchronous transfer	on all SCSI devices on the first bus.

     The system	should continue	to boot.  For now ignore ``WARNING'' messages
     about bad dates in	clocks,	and a warning about _/_e_t_c_/_r_c not	existing.
     Eventually	you will be be asked to	enter the pathname of the shell, just
     press RETURN.  After a short while, you will be asked to select the type
     of	your keyboard.	After you have entered a valid response	here, the sys-
     tem asks you if you want to install or upgrade your system.  Since	you
     are reading the _i_n_s_t_a_l_l section, `ii' would	be the proper response here...

     The installer starts with a nice welcome messages.	 Read this message
     carefully,	it also	informs	you of the risks involved in continuing!  If
     you still want to go on, type `yy'.	 The installer now continues by	trying
     to	figure out your	disk configuration.  When it is	done, you will be
     prompted to select	a root device from the list of disks it	has found.

     You should	know at	this point that	the disks are _n_o_t numbered according
     to	their SCSI-ID!	The NetBSD kernel numbers the SCSI drives (and other
     devices on	the SCSI bus) sequentially as it finds them.  The drive	with
     the lowest	SCSI-ID	will be	called sd0, the	next one sd1, etc.  Also, any
     ATAPI disk	drives (e.g. ZIP) will be configured as	``SCSI'' drives, too,
     and will be configured before any `real' SCSI drives if connected to the
     Amiga internal port on A4000/A1200	(if any	are present). Real IDE drives
     will be configured	as wd0,	wd1, etc.

     The installer will	offer you to look at the NetBSD	disk label of the
     disks at this point.  You should do this, to find out what	partition let-
     ters the NetBSD kernel assigned to	the partitions you created, and	as a
     check of whether the disk number you are going to use is right.

     _y_o_u _a_r_e _n_o_w _a_t _t_h_e	_p_o_i_n_t _o_f _n_o _r_e_t_u_r_n_. If you confirm that	you want to
     install NetBSD, your hard drive will be modified, and perhaps its con-
     tents scrambled at	the whim of the	install	program.  Type Control-C _n_o_w
     if	you don't want this.

     At	this time, you will need to tell the installer which partition will be
     associated	with the different file	systems.  Normally, you'll want	to add
     a partition for _/_u_s_r, at least.

     _C_a_v_e_a_t_:  Do not use the rsd_Nc or sd_Nc partitions for anything!  They are
	      for access to the	whole disk only	and do _n_o_t correspond to any
	      Amiga partition!

     The install program will now make the file	systems	you specified.	There
     should be only one	error per file system in this section of the installa-
     tion.  It will look like this:

	   newfs: ioctl	(WDINFO): Invalid argument
	   newfs: /dev/rsd0a: can't rewrite disk label

     If	there are any others, restart from the beginning of the	installation
     process.  This error is ok	as the Amiga does not write disklabels cur-
     rently.  You should expect	this error whenever using newfs.

     The install will now ask you want to configure any	network	information.
     It	will ask for the machine's host	name, domain name, and other network
     configuration information.

     Since the network configuration might have	lead to	additional (NFS) file
     system entries, you get another chance to modify your fstab.

     You are finally at	the point where	some real data will be put on your
     freshly made file systems.	 Select	the device type	you wish to install
     from and off you go....

     Some notes:

	   ++oo   If you want to install from tape, please	read the section about
	       how to create such a tape.

	   ++oo   Some tapes (e.g.	Archive	Viper 150) refuse to operate with the
	       default tape density (nrst0).  Try nrst0h, nrst0m, or nrst0l
	       instead.

	   ++oo   Install at least	the bbaassee and eettcc sets.

	   ++oo   If you have to specify a	path relative to the mount-point and
	       you need	the mount-point	itself,	use `_.'.

     Next you will be asked to specify the timezone.  Just select the timezone
     you are in.  The installer	will make the correct setup on your root file
     system (_/).  After	the timezone-link is installed,	the installer will
     proceed by	creating the device nodes on your root file system under _/_d_e_v.

     Be	patient, this will take	a while...

     Next, the installer will copy your	keymap settings	to the new system.
     After this, it will copy the kernel from the installation miniroot	to the
     newly installed / upgraded	system.	 If the	installed system already has a
     kernel, it	will ask you for confirmation.

     kern.tgz distribution set,	this is	an old kernel, and you should answer
     "y" to install a working (although	restricted) INSTALL kernel.

     If	you did	install	the kern.tgz kernel, you normally should answer	"n".

     Finally, the installer asks you if	you want to install the	bootblock code
     on	your root disk.	 This is a matter of personal choice and can also be
     done from a running NetBSD	system.	 See the installboot(8)	manual page
     about how to do this.

     Once the installer	is done, halt the system with the hhaalltt command (wait
     for halted	to be displayed) and reboot.  Then again boot NetBSD this time
     selecting the root	partition (_/) from the boot menu, and tell it to boot

	   netbsd -s

     You need to do your final tweaks now.  First mount	your file systems like
     so:

	   mmoouunntt --aavv

     Your system is now	complete, and it is up to you to configure the rest.
     You may want to start by looking at _/_e_t_c_/_r_c_._c_o_n_f.

     Once you are done with the	rest of	configuration unmount your file	sys-
     tems and halt your	system,	then reboot:

	   # ccdd	//
	   # uummoouunntt --aavv
	   # hhaalltt

     Finally you can now boot your system and it will be completely func-
     tional:

	   nneettbbssdd

     When it boots off of the hard drive, you will have	a complete NetBSD sys-
     tem!  _C_o_n_g_r_a_t_u_l_a_t_i_o_n_s_! (You really	deserve	them!!!)

   PPoosstt	iinnssttaallllaattiioonn sstteeppss
     Once you've got the operating system running, there are a few things you
     need to do	in order to bring the system into a properly configured	state.
     The most important	steps are described below.

     1.	  Before all else, read	postinstall(8).

     2.	  Configuring _/_e_t_c_/_r_c_._c_o_n_f

	  If you or the	installation software haven't done any configuration
	  of _/_e_t_c_/_r_c_._c_o_n_f (ssyyssiinnsstt normally will), the system will drop	you
	  into single user mode	on first reboot	with the message

		/etc/rc.conf is	not configured.	Multiuser boot aborted.

	  and with the root file system	(_/) mounted read-only.	When the sys-
	  tem asks you to choose a shell, simply press RETURN to get to	a
	  _/_b_i_n_/_s_h prompt.  If you are asked for	a terminal type, respond with
	  vvtt222200	(or whatever is	appropriate for	your terminal type) and	press
	  RETURN.  You may need	to type	one of the following commands to get
	  your delete key to work properly, depending on your keyboard:
		# ssttttyy eerraassee ''^^hh''
		# ssttttyy eerraassee ''^^??''
	  At this point, you need to configure at least	one file in the	_/_e_t_c
	  directory.  You will need to mount your root file system read/write
	  with:
		# //ssbbiinn//mmoouunntt --uu --ww //
	  Change to the	_/_e_t_c directory and take	a look at the _/_e_t_c_/_r_c_._c_o_n_f
	  file.	 Modify	it to your tastes, making sure that you	set
	  rc_configured=YES so that your changes will be enabled and a multi-
	  user boot can	proceed.  Default values for the various programs can
	  be found in _/_e_t_c_/_d_e_f_a_u_l_t_s_/_r_c_._c_o_n_f, where some	in-line	documentation
	  may be found.	 More complete documentation can be found in
	  rc.conf(5).

	  When you have	finished editing _/_e_t_c_/_r_c_._c_o_n_f, type eexxiitt at the	prompt
	  to leave the single-user shell and continue with the multi-user
	  boot.

	  Other	values that may	need to	be set in _/_e_t_c_/_r_c_._c_o_n_f for a networked
	  environment are _h_o_s_t_n_a_m_e and possibly	_d_e_f_a_u_l_t_r_o_u_t_e.  You may also
	  need to add an _i_f_c_o_n_f_i_g___i_n_t for your <int> network interface,	along
	  the lines of

		ifconfig_le0="inet 192.0.2.123 netmask 255.255.255.0"

	  or, if you have _m_y_n_a_m_e_._m_y_._d_o_m	in _/_e_t_c_/_h_o_s_t_s:

		ifconfig_le0="inet myname.my.dom netmask 255.255.255.0"

	  To enable proper hostname resolution,	you will also want to add an
	  _/_e_t_c_/_r_e_s_o_l_v_._c_o_n_f file	or (if you are feeling a little	more adventur-
	  ous) run named(8).  See resolv.conf(5) or named(8) for more informa-
	  tion.

	  Instead of manually configuring networking, DHCP can be used by set-
	  ting dhcpcd=YES in _/_e_t_c_/_r_c_._c_o_n_f.

     3.	  Logging in

	  After	reboot,	you can	log in as root at the login prompt.  If	you
	  didn't set a password	in ssyyssiinnsstt, there is no	initial	password.  You
	  should create	an account for yourself	(see below) and	protect	it and
	  the ``root'' account with good passwords.  By	default, root login
	  from the network is disabled (even via ssh(1)).  One way to become
	  root over the	network	is to log in as	a different user that belongs
	  to group ``wheel'' (see group(5)) and	use su(1) to become root.

     4.	  Adding accounts

	  Use the useradd(8) command to	add accounts to	your system.  Do not
	  edit _/_e_t_c_/_p_a_s_s_w_d directly! See vipw(8) and pwd_mkdb(8) if you	want
	  to edit the password database.

     5.	  The X	Window System

	  If you installed the X Window	System,	you may	want to	read the chap-
	  ter about X in the NetBSD Guide:
		hhttttpp::////wwwwww..NNeettBBSSDD..oorrgg//ddooccss//gguuiiddee//eenn//cchhaapp--xx..hhttmmll

     6.	  Installing third party packages

	  If you wish to install any of	the software freely available for
	  UNIX-like systems you	are strongly advised to	first check the	NetBSD
	  package system, pkgsrc.  pkgsrc automatically	handles	any changes
	  necessary to make the	software run on	NetBSD.	 This includes the
	  retrieval and	installation of	any other packages the software	may
	  depend upon.

	  ++oo   More information on the package system is	available at
		    hhttttpp::////wwwwww..NNeettBBSSDD..oorrgg//ddooccss//ssooffttwwaarree//ppaacckkaaggeess..hhttmmll

	  ++oo   A	list of	available packages suitable for	browsing is at
		    ffttpp::////ffttpp..NNeettBBSSDD..oorrgg//ppuubb//ppkkggssrrcc//ccuurrrreenntt//ppkkggssrrcc//RREEAADDMMEE..hhttmmll

	  ++oo   Precompiled binaries can be found	at
		    ffttpp::////ffttpp..NNeettBBSSDD..oorrgg//ppuubb//ppkkggssrrcc//ppaacckkaaggeess//NNeettBBSSDD//
	      usually in the _a_m_i_g_a_/_7_._0_._1_/_A_l_l subdir.  If you installed
	      pkgin(1) in the ssyyssiinnsstt post-installation	configuration menu,
	      you can use it to	automatically install binary packages over the
	      network.	Assuming that _/_u_s_r_/_p_k_g_/_e_t_c_/_p_k_g_i_n_/_r_e_p_o_s_i_t_o_r_i_e_s_._c_o_n_f is
	      correctly	configured, you	can install them with the following
	      commands:

	      ##	ppkkggiinn iinnssttaallll ttccsshh
	      ##	ppkkggiinn iinnssttaallll bbaasshh
	      ##	ppkkggiinn iinnssttaallll ppeerrll
	      ##	ppkkggiinn iinnssttaallll aappaacchhee
	      ##	ppkkggiinn iinnssttaallll kkddee
	      ##	ppkkggiinn iinnssttaallll ffiirreeffooxx
	      ...

	      _N_o_t_e_:  Some mirror sites don't mirror the	_/_p_u_b_/_p_k_g_s_r_c directory.

	      The above	commands will install the Tenex-csh and	Bourne Again
	      shells, the Perl programming language, Apache web	server,	KDE
	      desktop environment and the Firefox web browser as well as all
	      the packages they	depend on.

	  ++oo   If you did not install it	from the ssyyssiinnsstt post-installation
	      configuration menu, the pkgsrc(7)	framework for compiling	pack-
	      ages can be obtained by retrieving the file
		    ffttpp::////ffttpp..NNeettBBSSDD..oorrgg//ppuubb//ppkkggssrrcc//ppkkggssrrcc..ttaarr..ggzz.
	      It is typically extracted	into _/_u_s_r_/_p_k_g_s_r_c (though other loca-
	      tions work fine) with the	commands:

		    # ccdd //uussrr
		    # ttaarr --zzxxppff	ppkkggssrrcc..ttaarr..ggzz

	      After extracting,	see the	_d_o_c_/_p_k_g_s_r_c_._t_x_t file in the extraction
	      directory	(e.g., _/_u_s_r_/_p_k_g_s_r_c_/_d_o_c_/_p_k_g_s_r_c_._t_x_t) for more informa-
	      tion.

     7.	  Misc

	  ++oo   Edit _/_e_t_c_/_m_a_i_l_/_a_l_i_a_s_e_s to	forward	root mail to the right place.
	      Don't forget to run newaliases(1)	afterwards.

	  ++oo   Edit _/_e_t_c_/_r_c_._l_o_c_a_l to run	any local daemons you use.

	  ++oo   Many of the _/_e_t_c files are documented in section 5 of the	man-
	      ual; so just invoking

		    # mmaann 55 _f_i_l_e_n_a_m_e

	      is likely	to give	you more information on	these files.

   UUppggrraaddiinngg aa pprreevviioouussllyy--iinnssttaalllleedd NNeettBBSSDD SSyysstteemm
     The upgrade path to NetBSD	7.0.1 documented here is by binary sets.

     To	do the upgrade,	you must have the NetBSD kernel	on AmigaDOS and	you
     must transfer the miniroot	file system _m_i_n_i_r_o_o_t_._f_s	onto the swap parti-
     tion of the NetBSD	hard disk.  You	must also have at least	the bbaassee
     binary distribution set available.	 Finally, you must have	sufficient
     disk space	available to install the new binaries.	Since the old binaries
     are being overwritten in place, you only need space for the new binaries,
     which weren't previously on the system.  This is typically	not more than
     a few megabytes.

     Since upgrading involves replacing	the kernel and most of the system
     binaries, it has the potential to cause data loss.	 You are strongly
     advised to	BACK UP	ANY IMPORTANT DATA ON YOUR DISK, whether on the	NetBSD
     partition or on another operating system's	partition, before beginning
     the upgrade process.

     To	upgrade	your system, begin by transferring the miniroot	file system
     onto the hard disk	partition used by NetBSD for swapping, as described in
     the "Preparing your System	for NetBSD Installation" section above.

     Now boot up NetBSD, with bootblocks installed

     _N_o_t_e_:  This description is	for V40	(OS 3.1) ROMs.	For older ROMs,	there
	    might be small differences.	 Check your AmigaDOS documentation to
	    learn about	the exact procedure.  Booting using bootblocks doesn't
	    work at all	on some	systems, and may require a mountable file sys-
	    tem	on others.

     Reboot your machine, holding down both mouse buttons if you have a	2-but-
     ton mouse,	the outer mouse	buttons	if you have a 3-button mouse.  On the
     DraCo, press the left mouse button	instead, when the boot screen prompts
     you for it.

     From the boot menu, select	BBoooott OOppttiioonnss.  Select the swap partition with
     the miniroot, and then ookk.	 Select	BBoooott now.  The machine will boot the
     bootblock,	which will prompt you for a command line.  You have a few sec-
     onds to change the	default.  Entering an empty line will accept the
     default.

     The bootblock uses	command	lines of the form:
	 _f_i_l_e [_o_p_t_i_o_n_s]
     where _f_i_l_e	is the kernel file name	on the partition where the boot	block
     is	on, and	_o_p_t_i_o_n_s	may contain the	same as	described in the INSTALL sec-
     tion.

     For installing, use
	   nneettbbssdd --bb

     If	you machine has	a split	memory space, like, e.g., DraCo	machines, use
     this instead:

	   nneettbbssdd --bbnn22

     _O_n_c_e _y_o_u_r _k_e_r_n_e_l _b_o_o_t_s

     You should	see the	screen clear and some information about	your system as
     the kernel	configures the hardware.  Note which hard disk device is con-
     figured that contains your	root (_/) and swap partitions.  When prompted
     for the root device, type sd0b (replacing `0' with	the disk number	that
     NetBSD used for your root/swap device).  When prompted for	a dump device,
     answer `nnoonnee' for the upgrade.  (For a normal boot, you would tell	it one
     of	the swap devices).  When prompted for the root file system type, con-
     firm `ggeenneerriicc', which will	auto-detect it.

     You will be presented with	some information about the upgrade process and
     a warning message,	and will be asked if you wish to proceed with the
     upgrade process.  If you answer negatively, the upgrade process will
     stop, and your disk will not be modified.	If you answer affirmatively,
     the upgrade process will begin, and your disk will	be modified.  You may
     press CONTROL-C to	stop the upgrade process at any	time.  However,	if you
     press it at an inopportune	moment,	your system may	be left	in an incon-
     sistent (and possibly unusable) state.

     You will now be greeted and reminded of the fact that this	is a poten-
     tially dangerous procedure	and that you should not	upgrade	the eettcc	set.

     When you decide to	proceed, you will be prompted to enter your root disk.
     After you've done this, it	will be	checked	automatically to make sure
     that the file system is in	a sane state before making any modifications.
     After this	is done, you will be asked if you want to configure your net-
     work.

     You are now allowed to edit your fstab, but normally you don't have to.
     Note that the upgrade-kit uses its	own copy of the	fstab.	Whatever you
     do	here _w_o_n_'_t affect your actual fstab.  After you	are satisfied with
     your fstab, the upgrade-kit will check all	file systems mentioned in it.
     When they're ok, they will	be mounted.

     You will now be asked if your sets	are stored on a	normally mounted file
     system.  You should answer	`yy' to this question if	you have the sets
     stored on a file system that was present in the fstab.  The actions you
     should take for the set extraction	are pretty logical (we think).

     After you have extracted the sets,	the upgrade kit	will proceed with set-
     ting the timezone and installing the kernel and bootcode.	This is	all
     exactly the same as described in the installation section.

     _Y_o_u_r _s_y_s_t_e_m _h_a_s _n_o_w _b_e_e_n _u_p_g_r_a_d_e_d _t_o NetBSD 7.0.1.

     After a new kernel	has been copied	to your	hard disk, your	machine	is a
     complete NetBSD 7.0.1 system.  However, that doesn't mean that you're
     finished with the upgrade process.	 There are several things that you
     should do,	or might have to do, to	insure that the	system works properly.

     You will probably want to get the eettcc distribution, extract it, and com-
     pare its contents with those in your _/_e_t_c directory.  You will probably
     want to replace some of your system configuration files, or incorporate
     some of the changes in the	new versions into yours.

     You will want to delete old binaries that were part of the	version	of
     NetBSD that you upgraded from and have since been removed from the	NetBSD
     distribution.

   CCoommppaattiibbiilliittyy IIssssuueess	WWiitthh PPrreevviioouuss NNeettBBSSDD RReelleeaasseess
     Users upgrading from previous versions of NetBSD may wish to bear the
     following problems	and compatibility issues in mind when upgrading	to
     NetBSD 7.0.1.

     Note that ssyyssiinnsstt will automatically invoke

	   postinstall fix
     and thus all issues that are fixed	by ppoossttiinnssttaallll by default will be han-
     dled.

     A number of things	have been removed from the NetBSD 7.0.1	release.  See
     the ``Components removed from NetBSD'' section near the beginning of this
     document for a list.

     _I_s_s_u_e_s _a_f_f_e_c_t_i_n_g _a_n _u_p_g_r_a_d_e _f_r_o_m _N_e_t_B_S_D _5_._x _r_e_l_e_a_s_e_s

     See the section below on upgrading	from NetBSD 6.x	as well.

     The following users need to be created:
	   ++oo   _mdnsd
	   ++oo   _tests
	   ++oo   _tcpdump
	   ++oo   _tss

     The following groups need to be created:
	   ++oo   _mdnsd
	   ++oo   _tests
	   ++oo   _tcpdump
	   ++oo   _tss

     The implementation	of SHA2-HMAC in	KAME_IPSEC as used in NetBSD 5.0 and
     before did	not comply with	current	standards.  FAST_IPSEC does, with the
     result that old and new systems cannot communicate	over IPSEC if one of
     the affected authentication algorithms (hmac_sha256, hmac_sha384,
     hmac_sha512) is used.

     _I_s_s_u_e_s _a_f_f_e_c_t_i_n_g _a_n _u_p_g_r_a_d_e _f_r_o_m _N_e_t_B_S_D _6_._x _r_e_l_e_a_s_e_s

     The following user	needs to be created:
	   ++oo   _rtadvd

     The following groups need to be created:
	   ++oo   _gpio
	   ++oo   _rtadvd

   UUssiinngg oonnlliinnee	NNeettBBSSDD ddooccuummeennttaattiioonn
     Documentation is available	if you installed the manual distribution set.
     Traditionally, the	``man pages'' (documentation) are denoted by
     `name(section)'.  Some examples of	this are

	   ++oo   intro(1),
	   ++oo   man(1),
	   ++oo   apropos(1),
	   ++oo   passwd(1), and
	   ++oo   passwd(5).

     The section numbers group the topics into several categories, but three
     are of primary interest: user commands are	in section 1, file formats are
     in	section	5, and administrative information is in	section	8.

     The _m_a_n command is	used to	view the documentation on a topic, and is
     started by	entering mmaann [_s_e_c_t_i_o_n] _t_o_p_i_c.  The brackets [] around the sec-
     tion should not be	entered, but rather indicate that the section is
     optional.	If you don't ask for a particular section, the topic with the
     lowest numbered section name will be displayed.  For instance, after log-
     ging in, enter

	   # mmaann ppaasssswwdd

     to	read the documentation for passwd(1).  To view the documentation for
     passwd(5),	enter

	   # mmaann 55 ppaasssswwdd

     instead.

     If	you are	unsure of what man page	you are	looking	for, enter

	   # aapprrooppooss _s_u_b_j_e_c_t_-_w_o_r_d

     where _s_u_b_j_e_c_t_-_w_o_r_d	is your	topic of interest; a list of possibly related
     man pages will be displayed.

   AAddmmiinniissttrriivviiaa
     If	you've got something to	say, do	so!  We'd like your input.  There are
     various mailing lists available via the mailing list server at
     _m_a_j_o_r_d_o_m_o_@_N_e_t_B_S_D_._o_r_g.  See
	   hhttttpp::////wwwwww..NNeettBBSSDD..oorrgg//mmaaiilliinngglliissttss//
     for details.

     There are various mailing lists set up to deal with comments and ques-
     tions about this release.	Please send comments to:
     _n_e_t_b_s_d_-_c_o_m_m_e_n_t_s_@_N_e_t_B_S_D_._o_r_g.

     To	report bugs, use the send-pr(1)	command	shipped	with NetBSD, and fill
     in	as much	information about the problem as you can.  Good	bug reports
     include lots of details.

     Bugs also can be submitted	and queried with the web interface at
	   hhttttpp::////wwwwww..NNeettBBSSDD..oorrgg//ssuuppppoorrtt//sseenndd--pprr..hhttmmll

     There are also port-specific mailing lists, to discuss aspects of each
     port of NetBSD.  Use majordomo to find their addresses, or	visit
	   hhttttpp::////wwwwww..NNeettBBSSDD..oorrgg//mmaaiilliinngglliissttss//

     If	you're interested in doing a serious amount of work on a specific
     port, you probably	should contact the `owner' of that port	(listed
     below).

     If	you'd like to help with	NetBSD,	and have an idea as to how you could
     be	useful,	send us	mail or	subscribe to: _n_e_t_b_s_d_-_u_s_e_r_s_@_N_e_t_B_S_D_._o_r_g.

     As	a favor, please	avoid mailing huge documents or	files to these mailing
     lists.  Instead, put the material you would have sent up for FTP or WWW
     somewhere,	then mail the appropriate list about it.  If you'd rather not
     do	that, mail the list saying you'll send the data	to those who want it.

   TThhaannkkss ggoo ttoo
     ++oo	 The former members of UCB's Computer Systems Research Group, includ-
	 ing (but not limited to):

	       Keith Bostic
	       Ralph Campbell
	       Mike Karels
	       Marshall	Kirk McKusick

	 for their work	on BSD systems,	support, and encouragement.

     ++oo	 The Internet Systems Consortium, Inc. for hosting the NetBSD FTP,
	 CVS, AnonCVS, mail, mail archive, GNATS, SUP, Rsync and WWW servers.

     ++oo	 The Internet Research Institute in Japan for hosting the server which
	 runs the CVSweb interface to the NetBSD source	tree.

     ++oo	 The Columbia University Computer Science Department for hosting the
	 build cluster.

     ++oo	 The many organizations	that provide NetBSD mirror sites.

     ++oo	 Without CVS, this project would be impossible to manage, so our hats
	 go off	to Brian Berliner, Jeff	Polk, and the various other people
	 who've	had a hand in making CVS a useful tool.

     ++oo	 We list the individuals and organizations that	have made donations or
	 loans of hardware and/or money, to support NetBSD development,	and
	 deserve credit	for it at
	       hhttttpp::////wwwwww..NNeettBBSSDD..oorrgg//ddoonnaattiioonnss//
	 (If you're not	on that	list and should	be, tell us!  We probably were
	 not able to get in touch with you, to verify that you wanted to be
	 listed.)

     ++oo	 Finally, we thank all of the people who've put	sweat and tears	into
	 developing NetBSD since its inception in January, 1993.  (Obviously,
	 there are a lot more people who deserve thanks	here.  If you're one
	 of them, and would like to be mentioned, tell us!)

   WWee aarree......
     (in alphabetical order)

     _T_h_e _N_e_t_B_S_D	_c_o_r_e _g_r_o_u_p_:

	    Alan Barrett		_a_p_b_@_N_e_t_B_S_D_._o_r_g
	    Alistair Crooks		_a_g_c_@_N_e_t_B_S_D_._o_r_g
	    Matthew Green		_m_r_g_@_N_e_t_B_S_D_._o_r_g
	    Chuck Silvers		_c_h_s_@_N_e_t_B_S_D_._o_r_g
	    Matt Thomas			_m_a_t_t_@_N_e_t_B_S_D_._o_r_g
	    YAMAMOTO Takashi		_y_a_m_t_@_N_e_t_B_S_D_._o_r_g
	    Christos Zoulas		_c_h_r_i_s_t_o_s_@_N_e_t_B_S_D_._o_r_g

     _T_h_e _p_o_r_t_m_a_s_t_e_r_s _(_a_n_d _t_h_e_i_r	_p_o_r_t_s_)_:
	    Reinoud Zandijk		_r_e_i_n_o_u_d			 aaccoorrnn3322
	    Matt Thomas			_m_a_t_t			 aallpphhaa
	    Ignatios Souvatzis		_i_s			 aammiiggaa
	    Ignatios Souvatzis		_i_s			 aammiiggaappppcc
	    Noriyuki Soda		_s_o_d_a			 aarrcc
	    Julian Coleman		_j_d_c			 aattaarrii
	    Matthias Drochner		_d_r_o_c_h_n_e_r		 cceessffiicc
	    Erik Berls			_c_y_b_e_r			 ccoobbaalltt
	    Antti Kantee		_p_o_o_k_a			 eemmiippss
	    Simon Burge			_s_i_m_o_n_b			 eevvbbmmiippss
	    Steve Woodford		_s_c_w			 eevvbbppppcc
	    Izumi Tsutsui		_t_s_u_t_s_u_i			 eewwss44880000mmiippss
	    Izumi Tsutsui		_t_s_u_t_s_u_i			 hhpp330000
	    Nick Hudson			_s_k_r_l_l			 hhppppaa
	    Valeriy E. Ushakov		_u_w_e			 hhppccsshh
	    Matt Thomas			_m_a_t_t			 iibbmmnnwwss
	    Gavan Fantom		_g_a_v_a_n			 iiyyoonniixx
	    Valeriy E. Ushakov		_u_w_e			 llaannddiisskk
	    Izumi Tsutsui		_t_s_u_t_s_u_i			 lluunnaa6688kk
	    Scott Reynolds		_s_c_o_t_t_r			 mmaacc6688kk
	    Michael Lorenz		_m_a_c_a_l_l_a_n		 mmaaccppppcc
	    Steve Woodford		_s_c_w			 mmvvmmee6688kk
	    Steve Woodford		_s_c_w			 mmvvmmeeppppcc
	    Matt Thomas			_m_a_t_t			 nneettwwiinnddeerr
	    Izumi Tsutsui		_t_s_u_t_s_u_i			 nneewwss6688kk
	    Tim	Rightnour		_g_a_r_b_l_e_d			 ooffppppcc
	    Simon Burge			_s_i_m_o_n_b			 ppmmaaxx
	    Tim	Rightnour		_g_a_r_b_l_e_d			 pprreepp
	    Tim	Rightnour		_g_a_r_b_l_e_d			 rrss66000000
	    Tohru Nishimura		_n_i_s_i_m_u_r_a		 ssaannddppooiinntt
	    Simon Burge			_s_i_m_o_n_b			 ssbbmmiippss
	    S/oren J/orvang		_s_o_r_e_n			 ssggiimmiippss
	    SAITOH Masanobu		_m_s_a_i_t_o_h			 sshh33
	    Martin Husemann		_m_a_r_t_i_n			 ssppaarrcc6644
	    Anders Magnusson		_r_a_g_g_e			 vvaaxx
	    NISHIMURA Takeshi		_n_s_m_r_t_k_s			 xx6688kk
	    Manuel Bouyer		_b_o_u_y_e_r			 xxeenn

     _T_h_e _N_e_t_B_S_D	_7_._0_._1 _R_e_l_e_a_s_e _E_n_g_i_n_e_e_r_i_n_g _t_e_a_m_:

	    Stephen Borrill		_s_b_o_r_r_i_l_l_@_N_e_t_B_S_D_._o_r_g
	    Manuel Bouyer		_b_o_u_y_e_r_@_N_e_t_B_S_D_._o_r_g
	    David Brownlee		_a_b_s_@_N_e_t_B_S_D_._o_r_g
	    Julian Coleman		_j_d_c_@_N_e_t_B_S_D_._o_r_g
	    Alistair G.	Crooks		_a_g_c_@_N_e_t_B_S_D_._o_r_g
	    Hoavard Eidnes		_h_e_@_N_e_t_B_S_D_._o_r_g
	    Martin Husemann		_m_a_r_t_i_n_@_N_e_t_B_S_D_._o_r_g
	    Soren Jacobsen		_s_n_j_@_N_e_t_B_S_D_._o_r_g
	    Phil Nelson			_p_h_i_l_@_N_e_t_B_S_D_._o_r_g
	    Jeremy C. Reed		_r_e_e_d_@_N_e_t_B_S_D_._o_r_g
	    Jeff Rizzo			_r_i_z_@_N_e_t_B_S_D_._o_r_g
	    SAITOH Masanobu		_m_s_a_i_t_o_h_@_N_e_t_B_S_D_._o_r_g

     _N_e_t_B_S_D _D_e_v_e_l_o_p_e_r_s_:

	    Nathan Ahlstrom		_n_r_a_@_N_e_t_B_S_D_._o_r_g
	    Steve Allen			_w_o_r_m_e_y_@_N_e_t_B_S_D_._o_r_g
	    Jukka Andberg		_j_a_n_d_b_e_r_g_@_N_e_t_B_S_D_._o_r_g
	    Julian Assange		_p_r_o_f_f_@_N_e_t_B_S_D_._o_r_g
	    Lennart Augustsson		_a_u_g_u_s_t_s_s_@_N_e_t_B_S_D_._o_r_g
	    Zafer Aydogan		_z_a_f_e_r_@_N_e_t_B_S_D_._o_r_g
	    Christoph Badura		_b_a_d_@_N_e_t_B_S_D_._o_r_g
	    Marc Balmer			_m_b_a_l_m_e_r_@_N_e_t_B_S_D_._o_r_g
	    Bang Jun-Young		_j_u_n_y_o_u_n_g_@_N_e_t_B_S_D_._o_r_g
	    Dieter Baron		_d_i_l_l_o_@_N_e_t_B_S_D_._o_r_g
	    Robert V. Baron		_r_v_b_@_N_e_t_B_S_D_._o_r_g
	    Alan Barrett		_a_p_b_@_N_e_t_B_S_D_._o_r_g
	    Grant Beattie		_g_r_a_n_t_@_N_e_t_B_S_D_._o_r_g
	    Erik Berls			_c_y_b_e_r_@_N_e_t_B_S_D_._o_r_g
	    Hiroyuki Bessho		_b_s_h_@_N_e_t_B_S_D_._o_r_g
	    John Birrell		_j_b_@_N_e_t_B_S_D_._o_r_g
	    Rafal Boni			_r_a_f_a_l_@_N_e_t_B_S_D_._o_r_g
	    Stephen Borrill		_s_b_o_r_r_i_l_l_@_N_e_t_B_S_D_._o_r_g
	    Sean Boudreau		_s_e_a_n_b_@_N_e_t_B_S_D_._o_r_g
	    Manuel Bouyer		_b_o_u_y_e_r_@_N_e_t_B_S_D_._o_r_g
	    Allen Briggs		_b_r_i_g_g_s_@_N_e_t_B_S_D_._o_r_g
	    Mark Brinicombe		_m_a_r_k_@_N_e_t_B_S_D_._o_r_g
	    Aaron Brown			_a_b_r_o_w_n_@_N_e_t_B_S_D_._o_r_g
	    Andrew Brown		_a_t_a_t_a_t_@_N_e_t_B_S_D_._o_r_g
	    David Brownlee		_a_b_s_@_N_e_t_B_S_D_._o_r_g
	    Jon	Buller			_j_o_n_b_@_N_e_t_B_S_D_._o_r_g
	    Simon Burge			_s_i_m_o_n_b_@_N_e_t_B_S_D_._o_r_g
	    Robert Byrnes		_b_y_r_n_e_s_@_N_e_t_B_S_D_._o_r_g
	    Pavel Cahyna		_p_a_v_e_l_@_N_e_t_B_S_D_._o_r_g
	    D'Arcy J.M.	Cain		_d_a_r_c_y_@_N_e_t_B_S_D_._o_r_g
	    Taylor R. Campbell		_r_i_a_s_t_r_a_d_h_@_N_e_t_B_S_D_._o_r_g
	    Daniel Carosone		_d_a_n_@_N_e_t_B_S_D_._o_r_g
	    Dave Carrel			_c_a_r_r_e_l_@_N_e_t_B_S_D_._o_r_g
	    James Chacon		_j_m_c_@_N_e_t_B_S_D_._o_r_g
	    Mihai Chelaru		_k_e_f_r_e_n_@_N_e_t_B_S_D_._o_r_g
	    Aleksey Cheusov		_c_h_e_u_s_o_v_@_N_e_t_B_S_D_._o_r_g
	    Bill Coldwell		_b_i_l_l_c_@_N_e_t_B_S_D_._o_r_g
	    Julian Coleman		_j_d_c_@_N_e_t_B_S_D_._o_r_g
	    Marcus Comstedt		_m_a_r_c_u_s_@_N_e_t_B_S_D_._o_r_g
	    Jeremy Cooper		_j_e_r_e_m_y_@_N_e_t_B_S_D_._o_r_g
	    Thomas Cort			_t_c_o_r_t_@_N_e_t_B_S_D_._o_r_g
	    Chuck Cranor		_c_h_u_c_k_@_N_e_t_B_S_D_._o_r_g
	    Alistair Crooks		_a_g_c_@_N_e_t_B_S_D_._o_r_g
	    Masatake Daimon		_p_h_o_@_N_e_t_B_S_D_._o_r_g
	    Johan Danielsson		_j_o_d_a_@_N_e_t_B_S_D_._o_r_g
	    John Darrow			_j_d_a_r_r_o_w_@_N_e_t_B_S_D_._o_r_g
	    Jed	Davis			_j_l_d_@_N_e_t_B_S_D_._o_r_g
	    Matt DeBergalis		_d_e_b_e_r_g_@_N_e_t_B_S_D_._o_r_g
	    Arnaud Degroote		_d_e_g_r_o_o_t_e_@_N_e_t_B_S_D_._o_r_g
	    Rob	Deker			_d_e_k_e_r_@_N_e_t_B_S_D_._o_r_g
	    Chris G. Demetriou		_c_g_d_@_N_e_t_B_S_D_._o_r_g
	    Tracy Di Marco White	_g_e_n_d_a_l_i_a_@_N_e_t_B_S_D_._o_r_g
	    Jarom'ir Dolecek		_j_d_o_l_e_c_e_k_@_N_e_t_B_S_D_._o_r_g
	    Andy Doran			_a_d_@_N_e_t_B_S_D_._o_r_g
	    Roland Dowdeswell		_e_l_r_i_c_@_N_e_t_B_S_D_._o_r_g
	    Steven Drake		_s_b_d_@_N_e_t_B_S_D_._o_r_g
	    Emmanuel Dreyfus		_m_a_n_u_@_N_e_t_B_S_D_._o_r_g
	    Matthias Drochner		_d_r_o_c_h_n_e_r_@_N_e_t_B_S_D_._o_r_g
	    Jun	Ebihara			_j_u_n_@_N_e_t_B_S_D_._o_r_g
	    Elad Efrat			_e_l_a_d_@_N_e_t_B_S_D_._o_r_g
	    Hoavard Eidnes		_h_e_@_N_e_t_B_S_D_._o_r_g
	    Jaime A Fournier		_o_b_e_r_@_N_e_t_B_S_D_._o_r_g
	    Stoned Elipot		_s_e_b_@_N_e_t_B_S_D_._o_r_g
	    Michael van	Elst		_m_l_e_l_s_t_v_@_N_e_t_B_S_D_._o_r_g
	    Enami Tsugutomo		_e_n_a_m_i_@_N_e_t_B_S_D_._o_r_g
	    Bernd Ernesti		_v_e_e_g_o_@_N_e_t_B_S_D_._o_r_g
	    Erik Fair			_f_a_i_r_@_N_e_t_B_S_D_._o_r_g
	    Gavan Fantom		_g_a_v_a_n_@_N_e_t_B_S_D_._o_r_g
	    Hauke Fath			_h_a_u_k_e_@_N_e_t_B_S_D_._o_r_g
	    Hubert Feyrer		_h_u_b_e_r_t_f_@_N_e_t_B_S_D_._o_r_g
	    Jason R. Fink		_j_r_f_@_N_e_t_B_S_D_._o_r_g
	    Matt J. Fleming		_m_j_f_@_N_e_t_B_S_D_._o_r_g
	    Marty Fouts			_m_a_r_t_y_@_N_e_t_B_S_D_._o_r_g
	    Liam J. Foy			_l_i_a_m_j_f_o_y_@_N_e_t_B_S_D_._o_r_g
	    Matt Fredette		_f_r_e_d_e_t_t_e_@_N_e_t_B_S_D_._o_r_g
	    Thorsten Frueauf		_f_r_u_e_a_u_f_@_N_e_t_B_S_D_._o_r_g
	    Castor Fu			_c_a_s_t_o_r_@_N_e_t_B_S_D_._o_r_g
	    Hisashi Todd Fujinaka	_h_t_o_d_d_@_N_e_t_B_S_D_._o_r_g
	    Makoto Fujiwara		_m_e_f_@_N_e_t_B_S_D_._o_r_g
	    Ichiro Fukuhara		_i_c_h_i_r_o_@_N_e_t_B_S_D_._o_r_g
	    Quentin Garnier		_c_u_b_e_@_N_e_t_B_S_D_._o_r_g
	    Thomas Gerner		_t_h_o_m_a_s_@_N_e_t_B_S_D_._o_r_g
	    Simon J. Gerraty		_s_j_g_@_N_e_t_B_S_D_._o_r_g
	    Justin Gibbs		_g_i_b_b_s_@_N_e_t_B_S_D_._o_r_g
	    Chris Gilbert		_c_h_r_i_s_@_N_e_t_B_S_D_._o_r_g
	    Eric Gillespie		_e_p_g_@_N_e_t_B_S_D_._o_r_g
	    Brian Ginsbach		_g_i_n_s_b_a_c_h_@_N_e_t_B_S_D_._o_r_g
	    Oliver V. Gould		_v_e_r_@_N_e_t_B_S_D_._o_r_g
	    Paul Goyette		_p_g_o_y_e_t_t_e_@_N_e_t_B_S_D_._o_r_g
	    Michael Graff		_e_x_p_l_o_r_e_r_@_N_e_t_B_S_D_._o_r_g
	    Matthew Green		_m_r_g_@_N_e_t_B_S_D_._o_r_g
	    Andreas Gustafsson		_g_s_o_n_@_N_e_t_B_S_D_._o_r_g
	    Ulrich Habel		_r_h_a_e_n_@_N_e_t_B_S_D_._o_r_g
	    Jun-ichiro itojun Hagino	_i_t_o_j_u_n_@_N_e_t_B_S_D_._o_r_g
	    HAMAJIMA Katsuomi		_h_a_m_a_j_i_m_a_@_N_e_t_B_S_D_._o_r_g
	    Adam Hamsik			_h_a_a_d_@_N_e_t_B_S_D_._o_r_g
	    Juergen Hannken-Illjes	_h_a_n_n_k_e_n_@_N_e_t_B_S_D_._o_r_g
	    Charles M. Hannum		_m_y_c_r_o_f_t_@_N_e_t_B_S_D_._o_r_g
	    Yorick Hardy		_y_h_a_r_d_y_@_N_e_t_B_S_D_._o_r_g
	    Ben	Harris			_b_j_h_2_1_@_N_e_t_B_S_D_._o_r_g
	    Kenichi Hashimoto		_h_k_e_n_k_e_n_@_N_e_t_B_S_D_._o_r_g
	    Eric Haszlakiewicz		_e_r_h_@_N_e_t_B_S_D_._o_r_g
	    John Hawkinson		_j_h_a_w_k_@_N_e_t_B_S_D_._o_r_g
	    Emile Heitor		_i_m_i_l_@_N_e_t_B_S_D_._o_r_g
	    John Heasley		_h_e_a_s_@_N_e_t_B_S_D_._o_r_g
	    Lars Heidieker		_p_a_r_a_@_N_e_t_B_S_D_._o_r_g
	    Geert Hendrickx		_g_h_e_n_@_N_e_t_B_S_D_._o_r_g
	    Wen	Heping			_w_e_n_@_N_e_t_B_S_D_._o_r_g
	    Ren'e Hexel			_r_h_@_N_e_t_B_S_D_._o_r_g
	    Iain Hibbert		_p_l_u_n_k_y_@_N_e_t_B_S_D_._o_r_g
	    Kouichirou Hiratsuka	_h_i_r_a_@_N_e_t_B_S_D_._o_r_g
	    Michael L. Hitch		_m_h_i_t_c_h_@_N_e_t_B_S_D_._o_r_g
	    'Ad'am H'oka			_a_h_o_k_a_@_N_e_t_B_S_D_._o_r_g
	    Jachym Holecek		_f_r_e_z_a_@_N_e_t_B_S_D_._o_r_g
	    David A. Holland		_d_h_o_l_l_a_n_d_@_N_e_t_B_S_D_._o_r_g
	    Christian E. Hopps		_c_h_o_p_p_s_@_N_e_t_B_S_D_._o_r_g
	    Daniel Horecki		_m_o_r_r_@_N_e_t_B_S_D_._o_r_g
	    Ken	Hornstein		_k_e_n_h_@_N_e_t_B_S_D_._o_r_g
	    Marc Horowitz		_m_a_r_c_@_N_e_t_B_S_D_._o_r_g
	    Eduardo Horvath		_e_e_h_@_N_e_t_B_S_D_._o_r_g
	    Nick Hudson			_s_k_r_l_l_@_N_e_t_B_S_D_._o_r_g
	    Shell Hung			_s_h_e_l_l_@_N_e_t_B_S_D_._o_r_g
	    Darran Hunt			_d_a_r_r_a_n_@_N_e_t_B_S_D_._o_r_g
	    Martin Husemann		_m_a_r_t_i_n_@_N_e_t_B_S_D_._o_r_g
	    Dean Huxley			_d_e_a_n_@_N_e_t_B_S_D_._o_r_g
	    Love Hoernquist oAstrand	_l_h_a_@_N_e_t_B_S_D_._o_r_g
	    Roland Illig		_r_i_l_l_i_g_@_N_e_t_B_S_D_._o_r_g
	    Bernardo Innocenti		_b_e_r_n_i_e_@_N_e_t_B_S_D_._o_r_g
	    Tetsuya Isaki		_i_s_a_k_i_@_N_e_t_B_S_D_._o_r_g
	    ITOH Yasufumi		_i_t_o_h_y_@_N_e_t_B_S_D_._o_r_g
	    IWAMOTO Toshihiro		_t_o_s_h_i_i_@_N_e_t_B_S_D_._o_r_g
	    Matthew Jacob		_m_j_a_c_o_b_@_N_e_t_B_S_D_._o_r_g
	    Soren Jacobsen		_s_n_j_@_N_e_t_B_S_D_._o_r_g
	    Lonhyn T. Jasinskyj		_l_o_n_h_y_n_@_N_e_t_B_S_D_._o_r_g
	    Darrin Jewell		_d_b_j_@_N_e_t_B_S_D_._o_r_g
	    Nicolas Joly		_n_j_o_l_y_@_N_e_t_B_S_D_._o_r_g
	    S/oren J/orvang		_s_o_r_e_n_@_N_e_t_B_S_D_._o_r_g
	    Takahiro Kambe		_t_a_c_a_@_N_e_t_B_S_D_._o_r_g
	    Antti Kantee		_p_o_o_k_a_@_N_e_t_B_S_D_._o_r_g
	    Frank Kardel		_k_a_r_d_e_l_@_N_e_t_B_S_D_._o_r_g
	    KAWAMOTO Yosihisa		_k_a_w_a_m_o_t_o_@_N_e_t_B_S_D_._o_r_g
	    Min	Sik Kim			_m_i_n_s_k_i_m_@_N_e_t_B_S_D_._o_r_g
	    KIYOHARA Takashi		_k_i_y_o_h_a_r_a_@_N_e_t_B_S_D_._o_r_g
	    Thomas Klausner		_w_i_z_@_N_e_t_B_S_D_._o_r_g
	    Klaus Klein			_k_l_e_i_n_k_@_N_e_t_B_S_D_._o_r_g
	    John Klos			_j_k_l_o_s_@_N_e_t_B_S_D_._o_r_g
	    Wayne Knowles		_w_d_k_@_N_e_t_B_S_D_._o_r_g
	    Takayoshi Kochi		_k_o_c_h_i_@_N_e_t_B_S_D_._o_r_g
	    Mateusz Kocielski		_s_h_m_@_N_e_t_B_S_D_._o_r_g
	    Jonathan A.	Kollasch	_j_a_k_l_l_s_c_h_@_N_e_t_B_S_D_._o_r_g
	    Joseph Koshy		_j_k_o_s_h_y_@_N_e_t_B_S_D_._o_r_g
	    Radoslaw Kujawa		_r_k_u_j_a_w_a_@_N_e_t_B_S_D_._o_r_g
	    Jochen Kunz			_j_k_u_n_z_@_N_e_t_B_S_D_._o_r_g
	    Martti Kuparinen		_m_a_r_t_t_i_@_N_e_t_B_S_D_._o_r_g
	    Arnaud Lacombe		_a_l_c_@_N_e_t_B_S_D_._o_r_g
	    Kevin Lahey			_k_m_l_@_N_e_t_B_S_D_._o_r_g
	    David Laight		_d_s_l_@_N_e_t_B_S_D_._o_r_g
	    Johnny C. Lam		_j_l_a_m_@_N_e_t_B_S_D_._o_r_g
	    Guillaume Lasmayous		_g_l_s_@_N_e_t_B_S_D_._o_r_g
	    Martin J. Laubach		_m_j_l_@_N_e_t_B_S_D_._o_r_g
	    Greg Lehey			_g_r_o_g_@_N_e_t_B_S_D_._o_r_g
	    Ted	Lemon			_m_e_l_l_o_n_@_N_e_t_B_S_D_._o_r_g
	    Christian Limpach		_c_l_@_N_e_t_B_S_D_._o_r_g
	    Frank van der Linden	_f_v_d_l_@_N_e_t_B_S_D_._o_r_g
	    Joel Lindholm		_j_o_e_l_@_N_e_t_B_S_D_._o_r_g
	    Tonnerre Lombard		_t_o_n_n_e_r_r_e_@_N_e_t_B_S_D_._o_r_g
	    Mike Long			_m_i_k_e_l_@_N_e_t_B_S_D_._o_r_g
	    Sergio Lopez		_s_l_p_@_N_e_t_B_S_D_._o_r_g
	    Michael Lorenz		_m_a_c_a_l_l_a_n_@_N_e_t_B_S_D_._o_r_g
	    Warner Losh			_i_m_p_@_N_e_t_B_S_D_._o_r_g
	    Tomasz Luchowski		_z_u_n_t_u_m_@_N_e_t_B_S_D_._o_r_g
	    Federico Lupi		_f_e_d_e_r_i_c_o_@_N_e_t_B_S_D_._o_r_g
	    Palle Lyckegaard		_p_a_l_l_e_@_N_e_t_B_S_D_._o_r_g
	    Brett Lymn			_b_l_y_m_n_@_N_e_t_B_S_D_._o_r_g
	    MAEKAWA Masahide		_g_e_h_e_n_n_a_@_N_e_t_B_S_D_._o_r_g
	    Anders Magnusson		_r_a_g_g_e_@_N_e_t_B_S_D_._o_r_g
	    Anthony Mallet		_t_h_o_@_N_e_t_B_S_D_._o_r_g
	    John Marino			_m_a_r_i_n_o_@_N_e_t_B_S_D_._o_r_g
	    Roy	Marples			_r_o_y_@_N_e_t_B_S_D_._o_r_g
	    Pedro Martelletto		_p_e_d_r_o_@_N_e_t_B_S_D_._o_r_g
	    Cherry G. Mathew		_c_h_e_r_r_y_@_N_e_t_B_S_D_._o_r_g
	    David Maxwell		_d_a_v_i_d_@_N_e_t_B_S_D_._o_r_g
	    Gregory McGarry		_g_m_c_g_a_r_r_y_@_N_e_t_B_S_D_._o_r_g
	    Dan	McMahill		_d_m_c_m_a_h_i_l_l_@_N_e_t_B_S_D_._o_r_g
	    Jared D. McNeill		_j_m_c_n_e_i_l_l_@_N_e_t_B_S_D_._o_r_g
	    Neil J. McRae		_n_e_i_l_@_N_e_t_B_S_D_._o_r_g
	    Julio M. Merino Vidal	_j_m_m_v_@_N_e_t_B_S_D_._o_r_g
	    Perry Metzger		_p_e_r_r_y_@_N_e_t_B_S_D_._o_r_g
	    Luke Mewburn		_l_u_k_e_m_@_N_e_t_B_S_D_._o_r_g
	    Jean-Yves Migeon		_j_y_m_@_N_e_t_B_S_D_._o_r_g
	    Brook Milligan		_b_r_o_o_k_@_N_e_t_B_S_D_._o_r_g
	    Minoura Makoto		_m_i_n_o_u_r_a_@_N_e_t_B_S_D_._o_r_g
	    Simas Mockevicius		_s_y_m_k_a_@_N_e_t_B_S_D_._o_r_g
	    Ryosuke Moro		_s_z_p_t_v_l_f_n_@_N_e_t_B_S_D_._o_r_g
	    der	Mouse			_m_o_u_s_e_@_N_e_t_B_S_D_._o_r_g
	    Constantine	A. Murenin	_c_n_s_t_@_N_e_t_B_S_D_._o_r_g
	    Joseph Myers		_j_s_m_@_N_e_t_B_S_D_._o_r_g
	    Tuomo Maekinen		_t_j_a_m_@_N_e_t_B_S_D_._o_r_g
	    Zolt'an Arnold NAGY		_z_o_l_t_a_n_@_N_e_t_B_S_D_._o_r_g
	    Ken	Nakata			_k_e_n_n_@_N_e_t_B_S_D_._o_r_g
	    Takeshi Nakayama		_n_a_k_a_y_a_m_a_@_N_e_t_B_S_D_._o_r_g
	    Alexander Nasonov		_a_l_n_s_n_@_N_e_t_B_S_D_._o_r_g
	    Phil Nelson			_p_h_i_l_@_N_e_t_B_S_D_._o_r_g
	    John Nemeth			_j_n_e_m_e_t_h_@_N_e_t_B_S_D_._o_r_g
	    NISHIMURA Takeshi		_n_s_m_r_t_k_s_@_N_e_t_B_S_D_._o_r_g
	    Tohru Nishimura		_n_i_s_i_m_u_r_a_@_N_e_t_B_S_D_._o_r_g
	    NONAKA Kimihiro		_n_o_n_a_k_a_@_N_e_t_B_S_D_._o_r_g
	    Takehiko NOZAKI		_t_n_o_z_a_k_i_@_N_e_t_B_S_D_._o_r_g
	    Tobias Nygren		_t_n_n_@_N_e_t_B_S_D_._o_r_g
	    OBATA Akio			_o_b_a_c_h_e_@_N_e_t_B_S_D_._o_r_g
	    Jesse Off			_j_o_f_f_@_N_e_t_B_S_D_._o_r_g
	    Tatoku Ogaito		_t_a_c_h_a_@_N_e_t_B_S_D_._o_r_g
	    OKANO Takayoshi		_k_a_n_o_@_N_e_t_B_S_D_._o_r_g
	    Masaru Oki			_o_k_i_@_N_e_t_B_S_D_._o_r_g
	    Ryo	ONODERA			_r_y_o_o_n_@_N_e_t_B_S_D_._o_r_g
	    Atsushi Onoe		_o_n_o_e_@_N_e_t_B_S_D_._o_r_g
	    Greg Oster			_o_s_t_e_r_@_N_e_t_B_S_D_._o_r_g
	    Ryota Ozaki			_o_z_a_k_i_-_r_@_N_e_t_B_S_D_._o_r_g
	    Jonathan Perkin		_s_k_e_t_c_h_@_N_e_t_B_S_D_._o_r_g
	    Fredrik Pettai		_p_e_t_t_a_i_@_N_e_t_B_S_D_._o_r_g
	    Herb Peyerl			_h_p_e_y_e_r_l_@_N_e_t_B_S_D_._o_r_g
	    Matthias Pfaller		_m_a_t_t_h_i_a_s_@_N_e_t_B_S_D_._o_r_g
	    Chris Pinnock		_c_j_e_p_@_N_e_t_B_S_D_._o_r_g
	    Adrian Portelli		_a_d_r_i_a_n_p_@_N_e_t_B_S_D_._o_r_g
	    Pierre Pronchery		_k_h_o_r_b_e_n_@_N_e_t_B_S_D_._o_r_g
	    Chris Provenzano		_p_r_o_v_e_n_@_N_e_t_B_S_D_._o_r_g
	    Mindaugas Rasiukevicius	_r_m_i_n_d_@_N_e_t_B_S_D_._o_r_g
	    Michael Rauch		_m_r_a_u_c_h_@_N_e_t_B_S_D_._o_r_g
	    Marc Recht			_r_e_c_h_t_@_N_e_t_B_S_D_._o_r_g
	    Darren Reed			_d_a_r_r_e_n_r_@_N_e_t_B_S_D_._o_r_g
	    Jeremy C. Reed		_r_e_e_d_@_N_e_t_B_S_D_._o_r_g
	    Jens Rehsack		_s_n_o_@_N_e_t_B_S_D_._o_r_g
	    Antoine Reilles		_t_o_n_i_o_@_N_e_t_B_S_D_._o_r_g
	    Tyler R. Retzlaff		_r_t_r_@_N_e_t_B_S_D_._o_r_g
	    Scott Reynolds		_s_c_o_t_t_r_@_N_e_t_B_S_D_._o_r_g
	    Tim	Rightnour		_g_a_r_b_l_e_d_@_N_e_t_B_S_D_._o_r_g
	    Jeff Rizzo			_r_i_z_@_N_e_t_B_S_D_._o_r_g
	    Hans Rosenfeld		_h_a_n_s_@_N_e_t_B_S_D_._o_r_g
	    Steve Rumble		_r_u_m_b_l_e_@_N_e_t_B_S_D_._o_r_g
	    Rumko			_r_u_m_k_o_@_N_e_t_B_S_D_._o_r_g
	    Jukka Ruohonen		_j_r_u_o_h_o_@_N_e_t_B_S_D_._o_r_g
	    Blair J. Sadewitz		_b_j_s_@_N_e_t_B_S_D_._o_r_g
	    David Sainty		_d_s_a_i_n_t_y_@_N_e_t_B_S_D_._o_r_g
	    SAITOH Masanobu		_m_s_a_i_t_o_h_@_N_e_t_B_S_D_._o_r_g
	    Kazuki Sakamoto		_s_a_k_a_m_o_t_o_@_N_e_t_B_S_D_._o_r_g
	    Curt Sampson		_c_j_s_@_N_e_t_B_S_D_._o_r_g
	    Wilfredo Sanchez		_w_s_a_n_c_h_e_z_@_N_e_t_B_S_D_._o_r_g
	    Ty Sarna			_t_s_a_r_n_a_@_N_e_t_B_S_D_._o_r_g
	    SATO Kazumi			_s_a_t_o_@_N_e_t_B_S_D_._o_r_g
	    Jan	Schaumann		_j_s_c_h_a_u_m_a_@_N_e_t_B_S_D_._o_r_g
	    Matthias Scheler		_t_r_o_n_@_N_e_t_B_S_D_._o_r_g
	    Silke Scheler		_s_i_l_k_e_@_N_e_t_B_S_D_._o_r_g
	    Karl Schilke (rAT)		_r_a_t_@_N_e_t_B_S_D_._o_r_g
	    Amitai Schlair		_s_c_h_m_o_n_z_@_N_e_t_B_S_D_._o_r_g
	    Konrad Schroder		_p_e_r_s_e_a_n_t_@_N_e_t_B_S_D_._o_r_g
	    Georg Schwarz		_s_c_h_w_a_r_z_@_N_e_t_B_S_D_._o_r_g
	    Lubomir Sedlacik		_s_a_l_o_@_N_e_t_B_S_D_._o_r_g
	    Christopher	SEKIYA		_s_e_k_i_y_a_@_N_e_t_B_S_D_._o_r_g
	    Reed Shadgett		_d_e_n_t_@_N_e_t_B_S_D_._o_r_g
	    John Shannon		_s_h_a_n_n_o_n_j_r_@_N_e_t_B_S_D_._o_r_g
	    Tim	Shepard			_s_h_e_p_@_N_e_t_B_S_D_._o_r_g
	    Naoto Shimazaki		_i_g_y_@_N_e_t_B_S_D_._o_r_g
	    Ryo	Shimizu			_r_y_o_@_N_e_t_B_S_D_._o_r_g
	    Takao Shinohara		_s_h_i_n_@_N_e_t_B_S_D_._o_r_g
	    Takuya SHIOZAKI		_t_s_h_i_o_z_a_k_@_N_e_t_B_S_D_._o_r_g
	    Daniel Sieger		_d_s_i_e_g_e_r_@_N_e_t_B_S_D_._o_r_g
	    Chuck Silvers		_c_h_s_@_N_e_t_B_S_D_._o_r_g
	    Thor Lancelot Simon		_t_l_s_@_N_e_t_B_S_D_._o_r_g
	    Nathanial Sloss		_n_a_t_@_N_e_t_B_S_D_._o_r_g
	    Jeff Smith			_j_e_f_f_s_@_N_e_t_B_S_D_._o_r_g
	    Noriyuki Soda		_s_o_d_a_@_N_e_t_B_S_D_._o_r_g
	    Wolfgang Solfrank		_w_s_@_N_e_t_B_S_D_._o_r_g
	    Joerg Sonnenberger		_j_o_e_r_g_@_N_e_t_B_S_D_._o_r_g
	    Ignatios Souvatzis		_i_s_@_N_e_t_B_S_D_._o_r_g
	    T K	Spindler		_d_o_g_c_o_w_@_N_e_t_B_S_D_._o_r_g
	    Matthew Sporleder		_m_s_p_o_@_N_e_t_B_S_D_._o_r_g
	    Bill Squier			_g_r_o_o_@_N_e_t_B_S_D_._o_r_g
	    Adrian Steinmann		_a_s_t_@_N_e_t_B_S_D_._o_r_g
	    Bill Studenmund		_w_r_s_t_u_d_e_n_@_N_e_t_B_S_D_._o_r_g
	    Hiroki Suenaga		_h_s_u_e_n_a_g_a_@_N_e_t_B_S_D_._o_r_g
	    Kevin Sullivan		_s_u_l_l_i_v_a_n_@_N_e_t_B_S_D_._o_r_g
	    Kimmo Suominen		_k_i_m_@_N_e_t_B_S_D_._o_r_g
	    Gr'egoire Sutre		_g_s_u_t_r_e_@_N_e_t_B_S_D_._o_r_g
	    Sergey Svishchev		_s_h_a_t_t_e_r_e_d_@_N_e_t_B_S_D_._o_r_g
	    Robert Swindells		_r_j_s_@_N_e_t_B_S_D_._o_r_g
	    Shin Takemura		_t_a_k_e_m_u_r_a_@_N_e_t_B_S_D_._o_r_g
	    TAMURA Kent			_k_e_n_t_@_N_e_t_B_S_D_._o_r_g
	    Shin'ichiro	TAYA		_t_a_y_a_@_N_e_t_B_S_D_._o_r_g
	    Hasso Tepper		_h_a_s_s_o_@_N_e_t_B_S_D_._o_r_g
	    Matt Thomas			_m_a_t_t_@_N_e_t_B_S_D_._o_r_g
	    Jason Thorpe		_t_h_o_r_p_e_j_@_N_e_t_B_S_D_._o_r_g
	    Christoph Toshok		_t_o_s_h_o_k_@_N_e_t_B_S_D_._o_r_g
	    Tam'as T'oth			_t_t_o_t_h_@_N_e_t_B_S_D_._o_r_g
	    Greg Troxel			_g_d_t_@_N_e_t_B_S_D_._o_r_g
	    Tsubai Masanari		_t_s_u_b_a_i_@_N_e_t_B_S_D_._o_r_g
	    Izumi Tsutsui		_t_s_u_t_s_u_i_@_N_e_t_B_S_D_._o_r_g
	    UCHIYAMA Yasushi		_u_c_h_@_N_e_t_B_S_D_._o_r_g
	    Masao Uebayashi		_u_e_b_a_y_a_s_i_@_N_e_t_B_S_D_._o_r_g
	    Shuichiro URATA		_u_r_@_N_e_t_B_S_D_._o_r_g
	    Valeriy E. Ushakov		_u_w_e_@_N_e_t_B_S_D_._o_r_g
	    Todd Vierling		_t_v_@_N_e_t_B_S_D_._o_r_g
	    Maxime Villard		_m_a_x_v_@_N_e_t_B_S_D_._o_r_g
	    Aymeric Vincent		_a_y_m_e_r_i_c_@_N_e_t_B_S_D_._o_r_g
	    Paul Vixie			_v_i_x_i_e_@_N_e_t_B_S_D_._o_r_g
	    Mike M. Volokhov		_m_i_s_h_k_a_@_N_e_t_B_S_D_._o_r_g
	    Krister Walfridsson		_k_r_i_s_t_e_r_w_@_N_e_t_B_S_D_._o_r_g
	    Mark Weinem			_w_e_i_n_e_m_@_N_e_t_B_S_D_._o_r_g
	    Lex	Wennmacher		_w_e_n_n_m_a_c_h_@_N_e_t_B_S_D_._o_r_g
	    Leo	Weppelman		_l_e_o_@_N_e_t_B_S_D_._o_r_g
	    Assar Westerlund		_a_s_s_a_r_@_N_e_t_B_S_D_._o_r_g
	    Sebastian Wiedenroth	_w_i_e_d_i_@_N_e_t_B_S_D_._o_r_g
	    Frank Wille			_p_h_x_@_N_e_t_B_S_D_._o_r_g
	    Nathan Williams		_n_a_t_h_a_n_w_@_N_e_t_B_S_D_._o_r_g
	    Rob	Windsor			_w_i_n_d_s_o_r_@_N_e_t_B_S_D_._o_r_g
	    Jim	Wise			_j_w_i_s_e_@_N_e_t_B_S_D_._o_r_g
	    Colin Wood			_e_n_d_e_r_@_N_e_t_B_S_D_._o_r_g
	    Steve Woodford		_s_c_w_@_N_e_t_B_S_D_._o_r_g
	    YAMAMOTO Takashi		_y_a_m_t_@_N_e_t_B_S_D_._o_r_g
	    Yuji Yamano			_y_y_a_m_a_n_o_@_N_e_t_B_S_D_._o_r_g
	    David Young			_d_y_o_u_n_g_@_N_e_t_B_S_D_._o_r_g
	    Arnaud Ysmal		_s_t_a_c_k_t_i_c_@_N_e_t_B_S_D_._o_r_g
	    Reinoud Zandijk		_r_e_i_n_o_u_d_@_N_e_t_B_S_D_._o_r_g
	    S.P.Zeidler			_s_p_z_@_N_e_t_B_S_D_._o_r_g
	    Tim	Zingelman		_t_e_z_@_N_e_t_B_S_D_._o_r_g
	    Christos Zoulas		_c_h_r_i_s_t_o_s_@_N_e_t_B_S_D_._o_r_g


   LLeeggaall MMuummbboo--JJuummbboo
     All product names mentioned herein	are trademarks or registered trade-
     marks of their respective owners.

     The following notices are required	to satisfy the license terms of	the
     software that we have mentioned in	this document:

     NetBSD is a registered trademark of The NetBSD Foundation,	Inc.
     This product includes software developed by the University	of California,
     Berkeley and its contributors.
     This product includes software developed by the NetBSD Foundation.
     This product includes software developed by The NetBSD Foundation,	Inc.
     and its contributors.
     This product includes software developed for the NetBSD Project.  See
     http://www.NetBSD.org/ for	information about NetBSD.
     This product includes software developed by Intel Corporation and its
     contributors.
     This product includes cryptographic software written by Eric Young
     (eay@cryptsoft.com)
     This product includes cryptographic software written by Eric Young
     (eay@mincom.oz.au)
     This product includes software designed by	William	Allen Simpson.
     This product includes software developed at Ludd, University of Lulea,
     Sweden and	its contributors.
     This product includes software developed at Ludd, University of Lulea.
     This product includes software developed at the Information Technology
     Division, US Naval	Research Laboratory.
     This product includes software developed by David Jones and Gordon	Ross
     This product includes software developed by Hellmuth Michaelis and	Joerg
     Wunsch
     This product includes software developed by Internet Research Institute,
     Inc.
     This product includes software developed by Leo Weppelman and Waldi
     Ravens.
     This product includes software developed by  Mika Kortelainen
     This product includes software developed by Aaron Brown and Harvard Uni-
     versity.
     This product includes software developed by Adam Ciarcinski for the
     NetBSD project.
     This product includes software developed by Adam Glass and	Charles	M.
     Hannum.
     This product includes software developed by Adam Glass.
     This product includes software developed by Alex Zepeda, and Colin	Wood
     for the NetBSD Projet.
     This product includes software developed by Alex Zepeda.
     This product includes software developed by Allen Briggs.
     This product includes software developed by Amancio Hasty and Roger
     Hardiman
     This product includes software developed by Berkeley Software Design,
     Inc.
     This product includes software developed by Bill Paul.
     This product includes software developed by Bodo Moeller.	(If available,
     substitute	umlauted o for oe)
     This product includes software developed by Boris Popov.
     This product includes software developed by Brini.
     This product includes software developed by Bruce M. Simpson.
     This product includes software developed by Causality Limited.
     This product includes software developed by Charles Hannum.
     This product includes software developed by Charles M. Hannum, by the
     University	of Vermont and State Agricultural College and Garrett A.
     Wollman, by William F. Jolitz, and	by the University of California,
     Berkeley, Lawrence	Berkeley Laboratory, and its contributors.
     This product includes software developed by Charles M. Hannum.
     This product includes software developed by Christian E. Hopps, Ezra
     Story, Kari Mettinen, Markus Wild,	Lutz Vieweg and	Michael	Teske.
     This product includes software developed by Christian E. Hopps.
     This product includes software developed by Christopher G.	Demetriou for
     the NetBSD	Project.
     This product includes software developed by Christopher G.	Demetriou.
     This product includes software developed by Christos Zoulas.
     This product includes software developed by Chuck Silvers.
     This product includes software developed by Colin Wood for	the NetBSD
     Project.
     This product includes software developed by Colin Wood.
     This product includes software developed by Daan Vreeken.
     This product includes software developed by Daishi	Kato
     This product includes software developed by Daniel	Widenfalk and Michael
     L.	Hitch.
     This product includes software developed by Daniel	Widenfalk for the
     NetBSD Project.
     This product includes software developed by David Miller.
     This product includes software developed by Dean Huxley.
     This product includes software developed by Emmanuel Dreyfus
     This product includes software developed by Eric S. Hvozda.
     This product includes software developed by Eric S. Raymond
     This product includes software developed by Eric Young (eay@crypt-
     soft.com)
     This product includes software developed by Eric Young (eay@mincom.oz.au)
     This product includes software developed by Ezra Story and	 by Kari Met-
     tinen.
     This product includes software developed by Ezra Story, by	Kari Mettinen
     and by Bernd Ernesti.
     This product includes software developed by Ezra Story, by	Kari Mettinen,
     Michael Teske and by Bernd	Ernesti.
     This product includes software developed by Ezra Story, by	Kari Mettinen,
     and Michael Teske.
     This product includes software developed by Ezra Story.
     This product includes software developed by Frank van der Linden for the
     NetBSD Project.
     This product includes software developed by Gardner Buchanan.
     This product includes software developed by Garrett D'Amore.
     This product includes software developed by Gary Thomas.
     This product includes software developed by Gordon	Ross
     This product includes software developed by Harvard University and	its
     contributors.
     This product includes software developed by Harvard University.
     This product includes software developed by Henrik	Vestergaard Draboel.
     This product includes software developed by Herb Peyerl.
     This product includes software developed by Hidetoshi Shimokawa.
     This product includes software developed by Hubert	Feyrer for the NetBSD
     Project.
     This product includes software developed by Ian W.	Dall.
     This product includes software developed by Internet Initiative Japan
     Inc.
     This product includes software developed by James R. Maynard III.
     This product includes software developed by Jared D. McNeill.
     This product includes software developed by Jason L. Wright
     This product includes software developed by Jason R. Thorpe for And Com-
     munications, http://www.and.com/
     This product includes software developed by Joachim Koenig-Baltes.
     This product includes software developed by Jochen	Pohl for The NetBSD
     Project.
     This product includes software developed by Joerg Wunsch
     This product includes software developed by John Birrell.
     This product includes software developed by John P. Wittkoski.
     This product includes software developed by John Polstra.
     This product includes software developed by Jonathan R. Stone for the
     NetBSD Project.
     This product includes software developed by Jonathan Stone	and Jason R.
     Thorpe for	the NetBSD Project.
     This product includes software developed by Jonathan Stone.
     This product includes software developed by Jonathan Stone	for the	NetBSD
     Project.
     This product includes software developed by Julian	Highfield.
     This product includes software developed by K. Kobayashi.
     This product includes software developed by K. Kobayashi and H.
     Shimokawa.
     This product includes software developed by Kazuhisa Shimizu.
     This product includes software developed by Kazuki	Sakamoto.
     This product includes software developed by Kenneth Stailey.
     This product includes software developed by Kiyoshi Ikehara.
     This product includes software developed by Klaus Burkert,by Bernd
     Ernesti, by Michael van Elst, and by the University of California,	Berke-
     ley and its contributors.
     This product includes software developed by Lloyd Parkes.
     This product includes software developed by Lutz Vieweg.
     This product includes software developed by MINOURA Makoto, Takuya
     Harakawa.
     This product includes software developed by Marc Horowitz.
     This product includes software developed by Marcus	Comstedt.
     This product includes software developed by Mark Brinicombe for the
     NetBSD project.
     This product includes software developed by Mark Brinicombe.
     This product includes software developed by Mark Tinguely and Jim Lowe
     This product includes software developed by Markus	Wild.
     This product includes software developed by Marshall M. Midden.
     This product includes software developed by Masanobu Saitoh.
     This product includes software developed by Masaru	Oki.
     This product includes software developed by Matthew Fredette.
     This product includes software developed by Matt DeBergalis.
     This product includes software developed by Michael Smith.
     This product includes software developed by Microsoft.
     This product includes software developed by Mike Pritchard.
     This product includes software developed by Mike Pritchard	and contribu-
     tors.
     This product includes software developed by Minoura Makoto.
     This product includes software developed by Niels Provos.
     This product includes software developed by Niklas	Hallqvist, Brandon
     Creighton and Job de Haas.
     This product includes software developed by Niklas	Hallqvist.
     This product includes software developed by Paolo Abeni.
     This product includes software developed by Paul Kranenburg.
     This product includes software developed by Paul Mackerras.
     This product includes software developed by Per Fogelstrom
     This product includes software developed by Peter Galbavy.
     This product includes software developed by Phase One, Inc.
     This product includes software developed by Philip	A. Nelson.
     This product includes software developed by QUALCOMM Incorporated.
     This product includes software developed by RiscBSD.
     This product includes software developed by Roar Thronaes.
     This product includes software developed by Rodney	W. Grimes.
     This product includes software developed by Roger Hardiman
     This product includes software developed by Rolf Grossmann.
     This product includes software developed by Ross Harvey for the NetBSD
     Project.
     This product includes software developed by Ross Harvey.
     This product includes software developed by Scott Bartram.
     This product includes software developed by Scott Stevens.
     This product includes software developed by Shingo	WATANABE.
     This product includes software developed by Softweyr LLC, the University
     of	California, Berkeley, and its contributors.
     This product includes software developed by Stephan Thesing.
     This product includes software developed by Steven	M. Bellovin.
     This product includes software developed by Takashi Hamada.
     This product includes software developed by Takumi	Nakamura.
     This product includes software developed by Tatoku	Ogaito for the NetBSD
     Project.
     This product includes software developed by Terrence R. Lambert.
     This product includes software developed by Texas A&M University and its
     contributors.
     This product includes software developed by Thomas	Gerner.
     This product includes software developed by TooLs GmbH.
     This product includes software developed by Trimble Navigation, Ltd.
     This product includes software developed by WIDE Project and its contrib-
     utors.
     This product includes software developed by Waldi Ravens.
     This product includes software developed by Winning Strategies, Inc.
     This product includes software developed by Yasushi Yamasaki.
     This product includes software developed by Yen Yen Lim and North Dakota
     State University.
     This product includes software developed by Zembu Labs, Inc.
     This product includes software developed by the Alice Group.
     This product includes software developed by the Computer Systems Engi-
     neering Group at Lawrence Berkeley	Laboratory.
     This product includes software developed by the David Muir	Sharnoff.
     This product includes software developed by the Harvard University	and
     its contributors.
     This product includes software developed by the Kungliga Tekniska
     Hoegskolan	and its	contributors.
     This product includes software developed by the Network Research Group at
     Lawrence Berkeley Laboratory.
     This product includes software developed by the OpenSSL Project for use
     in	the OpenSSL Toolkit. (http://www.OpenSSL.org/)
     This product includes software developed by the PocketBSD project and its
     contributors.
     This product includes software developed by the RiscBSD kernel team.
     This product includes software developed by the RiscBSD team.
     This product includes software developed by the SMCC Technology Develop-
     ment Group	at Sun Microsystems, Inc.
     This product includes software developed by the University	of California,
     Berkeley and its contributors, as well as the Trustees of Columbia	Uni-
     versity.
     This product includes software developed by the University	of California,
     Lawrence Berkeley Laboratory and its contributors.
     This product includes software developed by the University	of California,
     Lawrence Berkeley Laboratory.
     This product includes software developed by the University	of Illinois at
     Urbana and	their contributors.
     This product includes software developed by the Urbana-Champaign Indepen-
     dent Media	Center.
     This product includes software developed by the University	of Vermont and
     State Agricultural	College	and Garrett A. Wollman.
     This product includes software developed by the University	of Vermont and
     State Agricultural	College	and Garrett A. Wollman,	by William F.  Jolitz,
     and by the	University of California, Berkeley, Lawrence Berkeley Labora-
     tory, and its contributors.
     This product includes software developed for the FreeBSD project
     This product includes software developed for the NetBSD Project by	Bernd
     Ernesti.
     This product includes software developed for the NetBSD Project by
     Christopher G. Demetriou.
     This product includes software developed for the NetBSD Project by	Frank
     van der Linden
     This product includes software developed for the NetBSD Project by	Jason
     R.	Thorpe.
     This product includes software developed for the NetBSD Project by	John
     M.	Vinopal.
     This product includes software developed by Kyma Systems.
     This product includes software developed for the NetBSD Project by	Kyma
     Systems LLC.
     This product includes software developed for the NetBSD Project by
     Matthias Drochner.
     This product includes software developed for the NetBSD Project by	Perry
     E.	Metzger.
     This product includes software developed for the NetBSD Project by	Scott
     Bartram and Frank van der Linden
     This product includes software developed for the NetBSD Project by	Alle-
     gro Networks, Inc., and Wasabi Systems, Inc.
     This product includes software developed for the NetBSD Project by	Eiji
     Kawauchi.
     This product includes software developed for the NetBSD Project by
     Genetec Corporation.
     This product includes software developed for the NetBSD Project by
     Jonathan Stone.
     This product includes software developed for the NetBSD Project by	Pier-
     mont Information Systems Inc.
     This product includes software developed for the NetBSD Project by	SUNET,
     Swedish University	Computer Network.
     This product includes software developed for the NetBSD Project by
     Shigeyuki Fukushima.
     This product includes software developed for the NetBSD Project by	Wasabi
     Systems, Inc.
     This product includes software developed under OpenBSD by Per Fogelstrom
     Opsycon AB	for RTMX Inc, North Carolina, USA.
     This product includes software developed under OpenBSD by Per Fogelstrom.
     This software was developed by Holger Veit	and Brian Moore	for use	with
     "386BSD" and similar operating systems.  "Similar operating systems"
     includes mainly non-profit	oriented systems for research and education,
     including but not restricted to "NetBSD", "FreeBSD", "Mach" (by CMU).
     This software includes software developed by the Computer Systems Labora-
     tory at the University of Utah.
     This product includes software developed by Computing Services at
     Carnegie Mellon University	(http://www.cmu.edu/computing/).
     This product includes software developed or owned by Caldera Interna-
     tional, Inc.
     The Institute of Electrical and Electronics Engineers and The Open	Group,
     have given	us permission to reprint portions of their documentation.

     In	the following statement, the phrase ``this text'' refers to portions
     of	the system documentation.

     Portions of this text are reprinted and reproduced	in electronic form in
     NetBSD, from IEEE Std 1003.1, 2004	Edition, Standard for Information
     Technology	-- Portable Operating System Interface (POSIX),	The Open Group
     Base Specifications Issue 6, Copyright (C)	2001-2004 by the Institute of
     Electrical	and Electronics	Engineers, Inc and The Open Group.  In the
     event of any discrepancy between these versions and the original IEEE and
     The Open Group Standard, the original IEEE	and The	Open Group Standard is
     the referee document.

     The original Standard can be obtained online at
     http://www.opengroup.org/unix/online.html.

     This notice shall appear on any product containing	this material.

     In	the following statement, "This software" refers	to the parallel	port
     driver:
	   This	software is a component	of "386BSD" developed by William F.
	   Jolitz, TeleMuse.

     Some files	have the following copyright:
	   Mach	Operating System
	   Copyright (c) 1991,1990,1989	Carnegie Mellon	University
	   All Rights Reserved.

	   Permission to use, copy, modify and distribute this software	and
	   its documentation is	hereby granted,	provided that both the copy-
	   right notice	and this permission notice appear in all copies	of the
	   software, derivative	works or modified versions, and	any portions
	   thereof, and	that both notices appear in supporting documentation.

	   CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS CONDITION.
	   CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR ANY DAMAGES
	   WHATSOEVER RESULTING	FROM THE USE OF	THIS SOFTWARE.

	   Carnegie Mellon requests users of this software to return to
	   Software Distribution Coordinator  or  Software.Distribu-
	   tion@CS.CMU.EDU
	   School of Computer Science
	   Carnegie Mellon University
	   Pittsburgh PA 15213-3890

	   any improvements or extensions that they make and grant Carnegie
	   the rights to redistribute these changes.

     Some files	have the following copyright:
	   Copyright (c) 1994, 1995 Carnegie-Mellon University.
	   All rights reserved.

	   Author: Chris G. Demetriou

	   Permission to use, copy, modify and distribute this software	and
	   its documentation is	hereby granted,	provided that both the copy-
	   right notice	and this permission notice appear in all copies	of the
	   software, derivative	works or modified versions, and	any portions
	   thereof, and	that both notices appear in supporting documentation.
	   CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
	   CONDITION.  CARNEGIE	MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR
	   ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.

	   Carnegie Mellon requests users of this software to return to
	   Software Distribution Coordinator  or  Software.Distribu-
	   tion@CS.CMU.EDU
	   School of Computer Science
	   Carnegie Mellon University
	   Pittsburgh PA 15213-3890

	   any improvements or extensions that they make and grant Carnegie
	   the rights to redistribute these changes.

     Some files	have the following copyright:
	   Copyright 1996 The Board of Trustees	of The Leland Stanford Junior
	   University. All Rights Reserved.

	   Permission to use, copy, modify, and	distribute this	software and
	   its documentation for any purpose and without fee is	hereby
	   granted, provided that the above copyright notice appear in all
	   copies.  Stanford University	makes no representations about the
	   suitability of this software	for any	purpose.  It is	provided "as
	   is" without express or implied warranty.

   TThhee EEnndd
NetBSD				 May 22, 2016				NetBSD
